Instructions

Combination

All applicants who are applying for a Class A CDL should be prepared to take the Combination test. This test covers information found in Section 6 of the Commercial Driver License.. Read More

All applicants who are applying for a Class A CDL should be prepared to take the Combination test. This test covers information found in Section 6 of the Commercial Driver License Manual. Section 6 provides the information needed to safely operate tractor-trailers, doubles, triples, and straight trucks with trailers. The test is made up of 20 multiple-choice questions, and applicants will have one hour to correctly answer a minimum of 16 questions. The Combination test is not a replacement for the Double/Triple endorsement test.

Number of Question 20

Passing Score 16

8. When driving a vehicle equipped with an Anti-Lock Braking System (ABS), brakes should be applied:

In the same way as they would be in a vehicle without ABS.

As the vehicle is placed in neutral.

With the hand brake.

When driving a vehicle with ABS, you should brake in the same manner as you would in a vehicle without ABS.

9. In a vehicle equipped with an automatic tractor protection valve, the valve will pop out when air pressure drops to a level between:

20 and 45 psi.

75 and 105 psi.

50 and 65 psi.

In vehicles equipped with an automatic tractor protection valve, the valve will pop out if air pressure drops to a level between 20 and 45 psi. When the valve pops out, the protection valve will close, stopping the flow of air.

10. Proper coupling technique:

Is the same on all vehicles.

Is essential to the safe operation of a vehicle.

Includes ensuring that the fifth wheel plate is not greased.

Can be learned over time.

Knowing proper coupling and uncoupling technique is fundamental to the safe operation of combination vehicles. Improper coupling can be very dangerous.

11. A shut-off valve:

Is located on the front of a trailer.

Is located on the instrument panel.

Prevents air from escaping an air brake system.

Should always be open.

Shut-off valves are used in air supply lines to control the passage of air from one trailer to another. The rear shut-off valve should always be closed to prevent air from leaving the braking system.

12. If you must cross traffic while driving a combination vehicle, you should:

Assume other drivers will make room for your vehicle.

Wait for a gap large enough for your vehicle to safely cross.

Rely only on your mirrors.

Combination vehicles require more space on the road than other vehicles. When entering or crossing traffic while driving a combination vehicle, it is especially important that there is a large enonugh gap in traffic to safely do so.

13. If your vehicle gets stuck on railroad tracks, you should:

Sit in the cab and call for help.

Exit the cab and walk away from the tracks.

Motion for another driver to push your vehicle.

If your vehicle gets stuck on railroad tracks for any reason, you should immediately exit the vehicle and walk away from the tracks. Contact the proper emergency authorities.

14. If your trailer goes off course while you are backing, you should:

Continue the backing process without changing anything.

Pull the truck forward, readjust, and start backing again.

Get out of the truck and move the trailer into the right position.

Turn the steering wheel all the way to the left until the trailer straightens out.

If your trailer goes off course while you are backing, you should pull your truck forward and reposition your vehicle as needed before continuing to back up.

Grade This Section

See the exact questions that will be on the 2024 Alabama DMV exam.

99.2% of people who use the cheat sheet pass the FIRST TIME

Alexa shares with us how she went in for her Class A permit and decided to get her Hazmat endorsement as a bonus!

Mark shares his feedback on his Class A CDL Cheat Sheet

Click Here
Full Cheat Sheet Unlock Your Exclusive Cheat Sheet!