Knowledge Test Class A
This license is required for driving any legal combination of vehicles, with a gross combination weight rating of 26,001 pounds or more, provided the GVWR of a trailer exceeds 10,000 pounds To receive this license, applicants must pass a 50-question test. To pass, applicants must answer 40 questions correctly. Each question has three possible answer choices. Test questions come from the Alaska Commercial Driver License Manual. Questions come from chapters covering: Introduction, Driving Safely, Transporting Cargo Safely, Air Brakes (if applicable), Combination, Doubles and Hazardous Materials. Endorsements that may be used with a Class A CDL are: Hazardous materials, Tank, Passenger, HazMat and Tank, Air Brakes and School bus.
Number of Question
Passing Score
29. In low temperatures, bridges usually freeze:
Explanation
In low temperatures, bridges usually freeze before other road surfaces. When driving in cold weather, especially when weather conditions have been wet, use special caution on bridges and overpasses.
30. Rough acceleration:
Explanation
Rough acceleration can cause mechanical damage, so be sure to accelerate smoothly and gradually.
31. If you will be transporting hazardous materials that require placards, you must:
Explanation
You must have a hazardous materials endorsement to transport a material that requires placards.
32. While driving, if you notice anything that affects safety or could lead to mechanical problems, you should:
Explanation
After finishing a day of driving, you may have to complete a written report on the condition of your vehicle. Be sure to mention anything that could affect safety or lead to mechanical breakdown.
33. How can a driver maintain alertness while driving?
Explanation
Eating heavy foods before driving or keeping the temperature in a cab too high can cause a driver to become drowsy while behind the wheel. Exercising and maintaining a healthy diet will help a driver to stay alert while driving.
34. ____ is a thin layer of ice that forms on road surfaces.
Explanation
Black ice is a thin layer of ice that is clear enough for the road surface to be seen through it. A road covered in black ice may look like it is merely wet instead of icy. Always be on the lookout for black ice if a road surface looks wet and temperatures are around the freezing mark.
35. If a truck is equipped, a trailer brake hand valve can be used to:
Explanation
If a tractor-trailer is so equipped, the trailer brake hand valve can be used to stop the vehicle from rolling back when being started from a stop.
Frequently Asked Questions
A Class A CDL license in Alaska is a commercial driver's license that allows the driver to operate a combination of vehicles with a total weight of 26,001 pounds or more, provided that the vehicle being towed weighs over 10,000 pounds. This license is required for drivers who want to operate tractor-trailers, tanker trucks, or any other combination of vehicles with a total weight of 26,001 or more pounds.
To obtain a Class A CDL license in Alaska, you must first pass a series of written tests and a skills test that includes a pre-trip inspection, basic control skills, and an on-road driving test. You must also meet certain medical and age requirements. Once you have passed all of the necessary tests and met the requirements, you will be issued a Class A CDL license which will allow you to legally operate commercial vehicles that fall within this category.
To obtain a Class A CDL license in Alaska, you must first pass a series of written tests and a skills test that includes a pre-trip inspection, basic control skills, and an on-road driving test. You must also meet certain medical and age requirements. Once you have passed all of the necessary tests and met the requirements, you will be issued a Class A CDL license which will allow you to legally operate commercial vehicles that fall within this category.
With a Class A CDL license in Alaska, you can operate a combination of vehicles with a gross vehicle weight rating (GVWR) of 26,001 pounds or more, provided that the vehicle being towed weighs over 10,000 pounds. Some examples of vehicles you can operate with a Class A CDL license include:
- Tractor-trailers: These are large trucks that are designed to pull one or more trailers behind them. They are commonly used in the transportation of goods and materials over long distances.
- Tanker trucks: These are trucks that are designed to transport liquids or gases in large tanks. They are commonly used in the transportation of fuel, oil, and chemicals.
- Flatbed trucks: These are trucks that have a flat bed with no sides or roof. They are commonly used in the transportation of large items such as machinery and construction materials.
- Livestock carriers: These are trucks that are designed to transport live animals such as cows, pigs, and horses.
It is important to note that there may be additional endorsements or requirements needed to operate certain types of vehicles, such as hazardous materials (HAZMAT) or passenger vehicles.
- Tractor-trailers: These are large trucks that are designed to pull one or more trailers behind them. They are commonly used in the transportation of goods and materials over long distances.
- Tanker trucks: These are trucks that are designed to transport liquids or gases in large tanks. They are commonly used in the transportation of fuel, oil, and chemicals.
- Flatbed trucks: These are trucks that have a flat bed with no sides or roof. They are commonly used in the transportation of large items such as machinery and construction materials.
- Livestock carriers: These are trucks that are designed to transport live animals such as cows, pigs, and horses.
It is important to note that there may be additional endorsements or requirements needed to operate certain types of vehicles, such as hazardous materials (HAZMAT) or passenger vehicles.
In Alaska, the minimum age requirement for a Class A CDL license is 19 years old. However, to operate a commercial vehicle across state lines or transport hazardous materials (HAZMAT), you must be at least 21 years old.
In addition to the age requirement, you must also meet certain medical and vision standards to obtain a Class A CDL license. You will need to pass a medical examination conducted by a licensed medical examiner and provide proof of your physical fitness. You will also need to pass a vision test and have a visual acuity of at least 20/40 in each eye with or without correction.
You must also have a valid Alaska driver's license and have a clean driving record for at least two years prior to applying for a Class A CDL license. Finally, you must pass a written knowledge test and a skills test that includes a pre-trip inspection, basic control skills, and an on-road driving test.
In addition to the age requirement, you must also meet certain medical and vision standards to obtain a Class A CDL license. You will need to pass a medical examination conducted by a licensed medical examiner and provide proof of your physical fitness. You will also need to pass a vision test and have a visual acuity of at least 20/40 in each eye with or without correction.
You must also have a valid Alaska driver's license and have a clean driving record for at least two years prior to applying for a Class A CDL license. Finally, you must pass a written knowledge test and a skills test that includes a pre-trip inspection, basic control skills, and an on-road driving test.
Yes, you may need additional endorsements for a Class A CDL license depending on the type of vehicle you will be operating and the cargo you will be transporting. The following endorsements are available for Class A CDL holders in Alaska:
1. T - Double/Triple Trailers: This endorsement is required if you will be operating a combination of two or three trailers.
2. P - Passenger: This endorsement is required if you will be operating a vehicle designed to transport 16 or more passengers, including the driver.
3. N - Tank Vehicles: This endorsement is required if you will be operating a vehicle that is designed to transport liquids or gases in bulk quantities.
4. H - Hazardous Materials: This endorsement is required if you will be transporting hazardous materials in quantities that require placards.
5. X - Combination of Tank Vehicle and Hazardous Materials: This endorsement is required if you will be transporting both hazardous materials and liquids or gases in bulk quantities.
You will need to pass additional written tests for each endorsement that you require. You may also need to complete additional training and provide proof of your qualifications, such as hazardous materials training certificates, to obtain certain endorsements.
1. T - Double/Triple Trailers: This endorsement is required if you will be operating a combination of two or three trailers.
2. P - Passenger: This endorsement is required if you will be operating a vehicle designed to transport 16 or more passengers, including the driver.
3. N - Tank Vehicles: This endorsement is required if you will be operating a vehicle that is designed to transport liquids or gases in bulk quantities.
4. H - Hazardous Materials: This endorsement is required if you will be transporting hazardous materials in quantities that require placards.
5. X - Combination of Tank Vehicle and Hazardous Materials: This endorsement is required if you will be transporting both hazardous materials and liquids or gases in bulk quantities.
You will need to pass additional written tests for each endorsement that you require. You may also need to complete additional training and provide proof of your qualifications, such as hazardous materials training certificates, to obtain certain endorsements.
The Class A CDL skills test in Alaska consists of three parts:
1. Pre-Trip Inspection: You will be required to inspect your vehicle to ensure that it is safe to operate. The examiner will ask you to identify and explain various parts of the vehicle and check for any defects or safety issues.
2. Basic Vehicle Control Skills: You will be asked to perform a series of maneuvers that test your ability to control the vehicle in tight spaces. These may include straight-line backing, alley docking, and offset backing.
3. On-Road Driving Test: You will be required to drive on public roads while the examiner observes your ability to handle the vehicle in traffic. You will be tested on your ability to obey traffic laws, maintain control of the vehicle, and communicate effectively with other drivers.
During the skills test, you will be evaluated on a point system. If you accumulate too many points or make a critical error, you may fail the test. To pass the skills test, you must demonstrate a high level of skill and safety in all three parts of the exam. It is important to practice and prepare thoroughly for the skills test to increase your chances of success.
1. Pre-Trip Inspection: You will be required to inspect your vehicle to ensure that it is safe to operate. The examiner will ask you to identify and explain various parts of the vehicle and check for any defects or safety issues.
2. Basic Vehicle Control Skills: You will be asked to perform a series of maneuvers that test your ability to control the vehicle in tight spaces. These may include straight-line backing, alley docking, and offset backing.
3. On-Road Driving Test: You will be required to drive on public roads while the examiner observes your ability to handle the vehicle in traffic. You will be tested on your ability to obey traffic laws, maintain control of the vehicle, and communicate effectively with other drivers.
During the skills test, you will be evaluated on a point system. If you accumulate too many points or make a critical error, you may fail the test. To pass the skills test, you must demonstrate a high level of skill and safety in all three parts of the exam. It is important to practice and prepare thoroughly for the skills test to increase your chances of success.
Yes, there are some restrictions or limitations for drivers with a Class A CDL license in Alaska. The following are some of the most common restrictions:
1. Intrastate Only: If a driver has a restriction of "intrastate only" on their CDL, it means that they are only allowed to operate commercial vehicles within the state of Alaska. They are not permitted to drive outside the state.
2. Air Brake Restriction: If a driver has an "air brake restriction" on their CDL, they are not allowed to operate vehicles with air brakes. They must complete an air brake knowledge test and a skills test in a vehicle equipped with air brakes to have this restriction removed.
3. Automatic Transmission Restriction: If a driver has an "automatic transmission restriction" on their CDL, they may only operate vehicles with automatic transmissions. They must complete a skills test in a vehicle with a manual transmission to have this restriction removed.
4. Lifting Restriction: If a driver has a "lifting restriction" on their CDL, they may not operate vehicles that require the driver to lift heavy objects or equipment.
It is important for drivers to be aware of any restrictions or limitations on their CDL and operate within the parameters of their license. Violating these restrictions can result in fines or even suspension or revocation of the CDL license.
1. Intrastate Only: If a driver has a restriction of "intrastate only" on their CDL, it means that they are only allowed to operate commercial vehicles within the state of Alaska. They are not permitted to drive outside the state.
2. Air Brake Restriction: If a driver has an "air brake restriction" on their CDL, they are not allowed to operate vehicles with air brakes. They must complete an air brake knowledge test and a skills test in a vehicle equipped with air brakes to have this restriction removed.
3. Automatic Transmission Restriction: If a driver has an "automatic transmission restriction" on their CDL, they may only operate vehicles with automatic transmissions. They must complete a skills test in a vehicle with a manual transmission to have this restriction removed.
4. Lifting Restriction: If a driver has a "lifting restriction" on their CDL, they may not operate vehicles that require the driver to lift heavy objects or equipment.
It is important for drivers to be aware of any restrictions or limitations on their CDL and operate within the parameters of their license. Violating these restrictions can result in fines or even suspension or revocation of the CDL license.
No, in Alaska, the Class A CDL written test is only available in English. You must be able to read and understand English to take the written test and obtain a CDL. This is because road signs, signals, and other traffic-related information in the United States are predominantly written in English. However, you may bring an interpreter with you to help translate the questions and answers during the test if necessary. It is important to note that the interpreter must be approved by the Alaska DMV and must not be a family member or friend. If you need an interpreter, you should contact your local DMV office in advance to make arrangements and ensure that your interpreter meets all requirements.
Yes, if you have a disability that may affect your ability to take the Class A CDL written test, you may request accommodations to ensure that you have an equal opportunity to take the test. The Alaska Division of Motor Vehicles (DMV) provides reasonable accommodations based on the Americans with Disabilities Act (ADA) guidelines.
To request accommodations for the Class A CDL written test, you should contact your local DMV office and inform them of your disability and the type of accommodation you require. The DMV may require documentation of your disability from a qualified medical professional to support your request for accommodations.
Examples of accommodations that may be provided include extra time to complete the test, a separate testing room, a reader or sign language interpreter, or a special computer program to assist with reading or answering questions.
It is important to note that accommodations are not guaranteed and are provided on a case-by-case basis. It is recommended that you contact the DMV well in advance of your scheduled test date to allow sufficient time for the accommodation request process.
To request accommodations for the Class A CDL written test, you should contact your local DMV office and inform them of your disability and the type of accommodation you require. The DMV may require documentation of your disability from a qualified medical professional to support your request for accommodations.
Examples of accommodations that may be provided include extra time to complete the test, a separate testing room, a reader or sign language interpreter, or a special computer program to assist with reading or answering questions.
It is important to note that accommodations are not guaranteed and are provided on a case-by-case basis. It is recommended that you contact the DMV well in advance of your scheduled test date to allow sufficient time for the accommodation request process.
If you fail the Class A CDL written test, you may retake the test, but you must wait at least one day before taking it again.
If you fail the test three times, you will have to wait at least 30 days before taking it again. It is important to note that a fee is required each time you take the test, regardless of whether you pass or fail.
Before retaking the test, it is recommended that you review the materials and study thoroughly to increase your chances of passing. The Alaska DMV provides free online practice tests and study guides on their website to help prepare for the written test.
If you continue to struggle with passing the written test, it may be helpful to seek additional resources such as a CDL training program or tutor to help you better understand the materials and prepare for the exam.
If you fail the test three times, you will have to wait at least 30 days before taking it again. It is important to note that a fee is required each time you take the test, regardless of whether you pass or fail.
Before retaking the test, it is recommended that you review the materials and study thoroughly to increase your chances of passing. The Alaska DMV provides free online practice tests and study guides on their website to help prepare for the written test.
If you continue to struggle with passing the written test, it may be helpful to seek additional resources such as a CDL training program or tutor to help you better understand the materials and prepare for the exam.
