Combination

All applicants who are applying for a Class A CDL should be prepared to take the Combination test. This test covers information found in Section 6 of the Connecticut Commercial Driver License.. Read More

All applicants who are applying for a Class A CDL should be prepared to take the Combination test. This test covers information found in Section 6 of the Connecticut Commercial Driver License Manual. Section 6 provides the information needed to safely operate tractor-trailers, doubles, triples, and straight trucks with trailers. The test is made up of 20 multiple-choice questions, and applicants will need to correctly answer a minimum of 16 questions to pass. The Combination test is not a replacement for the Double/Triple endorsement test.

Number of Question
Passing Score

8. If a trailer begins to skid, the driver should:

Explanation
If your trailer starts to skid while you are braking, you should release the brakes and allow them to begin to regain traction. Once its wheels have regained their grip on the road, the trailer will begin to straighten out and follow the tractor.

9. When braking while pulling a trailer equipped with anti-lock brakes, you should:

Explanation
When driving a tractor-trailer combination that is equipped with an Anti-Lock Braking System (ABS), you should brake in the same manner that you would if the vehicle was not equipped with ABS.

10. What does an Anti-Lock Braking System (ABS) do?

Explanation
An Anti-Lock Braking System (ABS) helps prevent wheel lockup during hard braking. If ABS detects impending lockup, it reduces braking pressure to a safe level.

11. Before a drive, ensure that air flows to all trailers by:

Explanation
Before a trip, ensure that air in the air brake system reaches all trailers. Do this by waiting for air pressure to build, then sending air to both the emergency and service lines and opening the shut-off valves on the rear of the last trailer. If air escapes from the shut-off valves in the rear of the combination, the air is being supplied to the entire vehicle.

12. Before a trip, you can make sure air flows to all trailers by:

Explanation
Before a trip, ensure that air in the air brake system reaches all trailers. Do this by waiting for air pressure to build, then sending air to both the emergency and service lines and opening the shut-off valves on the rear of the last trailer. If air escapes from the shut-off valves in the rear of the combination, the air is being supplied to the entire vehicle.

13. During a trip, which shut-off valves should be open?

Explanation
When starting a trip, be sure that all shut-off valves are in the open position, except for the last valves on the rear trailer. It is important that air reaches the brakes on all trailers and that the air is not able to escape from the back of the vehicle.

14. A combination vehicle has:

Explanation
Combination vehicles have two air lines: a service line and an emergency line.
DMV Writen Test