Double
This endorsement is required if the driver will pull two or three trailers. To receive this endorsement, applicants must pass a test. The test consists of 20 multiple choice questions. To pass, the applicant must answer at least 16 questions correctly. Each question has three or four possible answer choices. Test questions come from the Connecticut Commercial Driver License Manual. Questions come from chapters covering: Driving Safely, Air Brakes (if applicable), Combination Vehicles and Doubles and Triples. The Double/Triple endorsement can be used with the Class A CDL.
15. Having ABS on only one axle:
If you have an Anti-Lock Braking System (ABS) equipped on only the tractor, only the trailer, or only one axle, you will still have more control over the vehicle when braking than you would without ABS. You should brake normally.
16. When you double your speed from 20 to 40 mph, your vehicle's braking distance will become ____ times longer.
If you double your speed, your braking distance will become four times longer. Similarly, the impact your vehicle would have in the case of a collision will also multiply by four.
17. Using the brakes creates heat. If too much heat is produced:
Brakes are designed to take a lot of heat, but drivers should not rely solely on the brakes to slow their vehicle. Brakes may fade and lose their ability to slow down the vehicle if they become too hot, so drivers should also rely on the engine braking effect.
18. Brake fade is a result of:
If brakes are used too much, they will overheat and become less effective. This is referred to as brake fade.
19. Rust around wheel nuts may mean:
Rust around wheel nuts can indicate that the nuts are loose. If you find rust near the wheel nuts, check their tightness before beginning to drive.
20. If you doubt that you have enough space to safely drive under a bridge or sign, you should:
If you are not certain that your vehicle will fit under overhead objects, you should slow down and take a different route, if possible.
See the exact questions that will be on the 2024 Connecticut DMV exam.
99.2% of people who use the cheat sheet pass the FIRST TIME
Alexa shares with us how she went in for her Class A permit and decided to get her Hazmat endorsement as a bonus!
Mark shares his feedback on his Class A CDL Cheat Sheet
Frequently Asked Questions
1. Obtain a Connecticut Commercial Driver's License (CDL): To obtain a Connecticut CDL, you need to provide the required documents and pass the knowledge and skills test.
2. Meet the eligibility requirements: You must be at least 18 years old to operate within Connecticut and 21 years old to operate across state lines. You must also have a valid medical certificate.
3. Study the CDL Doubles/Triples endorsement manual: The manual contains all the information you need to know about driving doubles/triples vehicles.
4. Schedule an appointment at a DMV office: You can schedule an appointment online or by calling the DMV.
5. Pass the Doubles/Triples knowledge test: The test consists of 20 multiple-choice questions, and you must answer at least 16 correctly to pass.
6. Pass the Doubles/Triples skills test: The skills test evaluates your ability to handle double/triple trailers in different situations, such as turning, backing up, and parking.
7. Pay the endorsement fee: The fee for the Doubles/Triples endorsement is $15.
Once you have passed both tests and paid the fee, your CDL will be updated with the Doubles/Triples endorsement, and you will be authorized to operate double/triple trailers in Connecticut and across state lines if you meet the age requirement.
1. Be at least 18 years old to operate within the state of Connecticut and 21 years old to operate across state lines.
2. Have a valid Connecticut commercial driver's license (CDL).
3. Pass the Connecticut CDL Doubles/Triples knowledge test, which consists of 20 multiple-choice questions. You must answer at least 16 questions correctly to pass.
4. Pass the Connecticut CDL Doubles/Triples skills test, which evaluates your ability to handle double/triple trailers in different situations, such as turning, backing up, and parking.
5. Have a valid medical certificate.
6. Pay the required fee for the Doubles/Triples endorsement.
It is important to note that obtaining a Doubles/Triples endorsement requires additional knowledge and skills beyond those required for a standard CDL license. Therefore, it is recommended that you study the CDL Doubles/Triples endorsement manual thoroughly before taking the knowledge and skills tests.
According to the Connecticut DMV, you must have a valid CDL and at least one year of experience driving a commercial vehicle with a Class A or B license before applying for the Doubles/Triples endorsement.
In addition to experience, it is highly recommended that you complete a specialized training program that covers the handling of double/triple trailers. Some truck driving schools and training facilities offer specific courses for Doubles/Triples endorsements, which can provide you with the necessary skills and knowledge to pass the endorsement tests.
It is important to note that operating double/triple trailers requires additional skills and knowledge beyond those required for a standard CDL license. Therefore, it is important to receive proper training and gain sufficient experience before attempting to obtain a Doubles/Triples endorsement.
The written test for the Doubles/Triples endorsement is a 20-question multiple-choice exam that covers topics specific to driving double/triple trailers, such as handling and braking, coupling and uncoupling, and inspecting the trailers. You must correctly answer at least 16 out of the 20 questions to pass the test.
It is important to study the Connecticut CDL Doubles/Triples endorsement manual thoroughly before taking the written test. The manual outlines all of the information and skills that you will need to know in order to pass the test and safely operate double/triple trailers.
In addition to the written test, you will also need to pass a skills test that evaluates your ability to handle double/triple trailers in various situations, such as turning, backing up, and parking. The skills test is typically conducted on a closed course or at a designated testing facility.
1. Pre-trip inspection: You will need to demonstrate your ability to properly inspect both the tractor and the trailers for safety and operational issues.
2. Coupling and uncoupling: You will need to properly couple and uncouple the trailers, including connecting air lines, electrical cables, safety chains, and landing gear.
3. Straight line backing: You will need to back up the tractor-trailer combination in a straight line for a specified distance.
4. Off-set backing: You will need to back up the tractor-trailer combination through a series of cones or markers, simulating a real-world situation where you need to maneuver around an obstacle.
5. Parallel parking: You will need to park the tractor-trailer combination in a designated parking spot parallel to the curb or other vehicle.
6. Coupling and uncoupling of doubles/triples: You will need to demonstrate your ability to safely couple and uncouple double/triple trailers.
7. Driving on the road: You will need to safely navigate through traffic while driving double/triple trailers, including making turns, changing lanes, and merging onto highways.
It is important to note that these skills and maneuvers require additional skill and knowledge beyond those required for a standard CDL license. Therefore, it is important to receive proper training and gain sufficient experience before attempting to obtain a Doubles/Triples endorsement or taking the skills test.
In Connecticut, any combination of vehicles with a gross vehicle weight rating (GVWR) of 26,001 pounds or more requires a CDL. This includes double/triple trailers.
To legally drive double/triple trailers, you must first obtain a CDL, and then pass the additional written test and skills test to obtain the Doubles/Triples endorsement.
Driving without the proper CDL and endorsements can result in fines, penalties, and even the suspension or revocation of your commercial driving privileges. It is important to ensure that you have all of the necessary endorsements and training before operating any commercial vehicle on Connecticut roads.
To add the Doubles/Triples endorsement, you will need to pass the written test specific to this endorsement, and then pass the skills test in a vehicle with double/triple trailers.
You can either schedule an appointment at a Connecticut DMV branch office or through a third-party tester authorized by the DMV. You will need to provide identification documents, your current CDL license, and pay the applicable fee.
Once you have successfully passed both tests, your CDL license will be updated to include the Doubles/Triples endorsement.
It is important to note that obtaining a Doubles/Triples endorsement requires additional training and experience beyond that required for a standard CDL license. It is recommended that you receive proper training before attempting to obtain this endorsement.
1. Length Limitations: Drivers with a Doubles/Triples endorsement are restricted to operating trailers up to a maximum length of 28 feet each.
2. Weight Limitations: Drivers with a Doubles/Triples endorsement are restricted to operating combination vehicles with a maximum gross vehicle weight rating (GVWR) of 80,000 pounds.
3. Endorsement Limitations: A Doubles/Triples endorsement does not allow you to operate vehicles with other types of endorsements, such as hazardous materials or passenger endorsements, unless you also have those endorsements on your CDL license.
4. Training Requirements: Before operating double/triple trailers, drivers must complete additional training beyond the standard CDL training requirements.
5. Insurance Requirements: Some insurance companies may require additional coverage for drivers with a Doubles/Triples endorsement, so it is important to check with your insurance provider before operating these vehicles.
It is important to abide by these restrictions and limitations to ensure the safety of yourself and other drivers on the road. Violating these restrictions can lead to fines, penalties, and even the suspension or revocation of your commercial driving privileges.
The maximum weight limit for combination vehicles, including double or triple trailers, is 80,000 pounds. This is the same as the weight limit for standard commercial vehicles with a CDL license.
The maximum length limit for double trailers is 28 feet per trailer, for a total maximum combined length of 68 feet, including the truck and all trailers. For triple trailers, the maximum length of each trailer is also limited to 28 feet, with a total maximum combined length of 99 feet, including the truck and all trailers.
It's important to note that these weight and length limits are subject to change based on state and federal regulations. As a commercial driver, it's important to stay up-to-date on any changes to these regulations to ensure you are in compliance with the law.
1. Proper Loading: Double/triple trailers must be loaded evenly and properly balanced to prevent them from tipping over or becoming unstable while in motion.
2. Increased Stopping Distance: Due to their size and weight, double/triple trailers require significantly more stopping distance than standard commercial vehicles. Drivers should maintain a safe following distance and reduce speed when approaching intersections or other potential hazards.
3. Wide Turns: Double/triple trailers have a longer wheelbase, which makes turning more difficult. Drivers should use caution when turning to avoid striking other vehicles or objects.
4. Mirror Setup: Drivers of double/triple trailers must have properly adjusted mirrors that provide a clear view of all areas around the vehicle.
5. Additional Training: Drivers with a CDL Doubles/Triples endorsement must complete additional training beyond the standard CDL training requirements to ensure they understand the specific safety considerations and regulations for operating these vehicles.
6. Weather Conditions: Drivers must be aware of weather conditions when operating double/triple trailers, especially during high winds or heavy rain, which can increase the risk of instability or accidents.
It is important to follow these safety considerations and regulations to reduce the risk of accidents and ensure the safety of yourself and other drivers on the road.