Double
This endorsement is required if the driver will pull two or three trailers. To receive this endorsement, applicants must pass a test. The test consists of 20 multiple choice questions. To pass, the applicant must answer at least 16 questions correctly. Each question has four possible answer choices. Test questions come from the Washington D.C. Commercial Driver License Manual. Questions come from chapters covering: Driving Safely, Air Brakes (if applicable), Combination Vehicles and Doubles and Triples. The Double/Triple endorsement can be used with the Class A CDL.
8. Driving a combination vehicle ____ than driving a single vehicle.
Driving a combination vehicle usually requires more skill than driving a single vehicle. Combination vehicles are generally longer and heavier than single commercial vehicles.
9. When starting the engine of a truck with a trailer, how can you tell if the Anti-Lock Braking System (ABS) is not working?
Trailers equipped with Anti-Lock Braking Systems (ABS) are equipped on the left rear with a yellow malfunction lamp. If the malfunction lamp stays on after the engine has been started, the ABS is malfunctioning.
10. How can you prevent drowsiness before a trip?
To prevent drowsiness on a long trip, strategies include getting adequate sleep beforehand; planning out the route and stopping points in advance; driving with a passenger; and driving at times during which you are normally awake.
11. If a roadway is covered by fog, it is best for you to:
Driving in fog is always dangerous. If possible, you should always avoid driving under foggy conditions.
12. What is another name for the service line?
The trailer service air line may also be referred to as the control line or signal line.
13. When using the controlled braking method in an emergency situation, you should:
The controlled braking method for emergency stops involves applying the brakes as hard as you can without locking the wheels. Keep steering wheel movements small when braking in this way.
14. When inspecting coupling equipment before a trip, the fifth wheel should be:
When inspecting the convertor dolly, make sure all components are present and in proper working condition. Be sure to check the upper and lower fifth wheel, the air lines, and the electric lines. The fifth wheel should be properly greased and securely mounted.
See the exact questions that will be on the 2024 District Of Columbia DMV exam.
99.2% of people who use the cheat sheet pass the FIRST TIME
Alexa shares with us how she went in for her Class A permit and decided to get her Hazmat endorsement as a bonus!
Mark shares his feedback on his Class A CDL Cheat Sheet
Frequently Asked Questions
1. Obtain a valid District Of Columbia Commercial Driver's License (CDL).
2. Study the District Of Columbia CDL Manual and become familiar with the information related to Doubles/Triples endorsements.
3. Schedule an appointment with a District Of Columbia Department of Motor Vehicles (DMV) office that offers CDL testing services.
4. Pass a written test on Doubles/Triples knowledge. The test will cover information such as coupling and uncoupling, inspecting doubles and triples, and driving doubles and triples.
5. Pass a skills test in a vehicle equipped with Doubles/Triples.
6. Pay the required fee for the endorsement.
It's important to note that you must already have a valid CDL before you can obtain any endorsements. Also, make sure to bring all necessary documents, such as your current CDL, proof of identity, and proof of residency, to your DMV appointment.
1. Be at least 21 years of age: You must be at least 21 years old to operate a commercial motor vehicle (CMV) that is transporting hazardous materials or is designed to transport more than 15 passengers, including the driver.
2. Hold a valid DC commercial driver's license (CDL): You must already have a valid CDL before you can obtain any endorsements.
3. Have a clean driving record: You cannot have any serious traffic violations on your driving record, such as DUI or hit-and-run, within the last three years.
4. Pass a written test on Doubles/Triples knowledge: The test will cover information such as coupling and uncoupling, inspecting doubles and triples, and driving doubles and triples.
5. Pass a skills test in a vehicle equipped with Doubles/Triples: You will need to demonstrate your ability to operate a commercial vehicle with Doubles/Triples attached to it.
6. Pay the required fee for the endorsement: In District of Columbia, there is an additional fee of $20 for each endorsement you apply for.
It's important to note that the requirements may vary by state, so make sure to check with your local DMV for specific information on obtaining a CDL Doubles/Triples license in your area.
Training will help you develop the knowledge and skills required to safely operate a commercial vehicle with Doubles/Triples. You can attend a commercial driving school or receive training from a qualified individual or company. The training may include classroom instruction, hands-on experience, and behind-the-wheel practice.
Additionally, some employers may require that you have specific experience or training before operating a commercial vehicle with Doubles/Triples. Therefore, it is essential to check with your potential employer before applying for this endorsement.
It's important to remember that operating a commercial vehicle with Doubles/Triples is more challenging than driving a single commercial vehicle. Therefore, you should only attempt to operate Doubles/Triples if you are confident in your abilities and have received adequate training.
The written test will include questions on topics such as:
1. Coupling and uncoupling Doubles/Triples
2. Inspecting Doubles/Triples
3. Driving techniques for Doubles/Triples
4. Safe operation of Doubles/Triples
5. Special rules and regulations for Doubles/Triples
You will need to answer at least 80% of the questions correctly to pass the written test and obtain the CDL Doubles/Triples endorsement.
It's important to note that the written test is not the only requirement for obtaining a CDL Doubles/Triples endorsement. You will also need to pass a skills test in a vehicle equipped with Doubles/Triples, which will include demonstrating your ability to safely operate a commercial vehicle with Doubles/Triples attached.
Make sure to study and prepare thoroughly for the written and skills tests before attempting to obtain your CDL Doubles/Triples endorsement.
The specific skills and maneuvers you will need to demonstrate during the CDL Doubles/Triples endorsement test include:
1. Coupling and uncoupling Doubles/Triples
2. Driving forward through a set of cones, then backing up through the same set of cones
3. Turning at an intersection with Doubles/Triples
4. Merging onto a highway with Doubles/Triples
5. Changing lanes with Doubles/Triples
6. Exiting a highway with Doubles/Triples
During the skills test, the examiner will be looking for your ability to safely and effectively operate the commercial vehicle with Doubles/Triples attached. You will need to demonstrate proper techniques for turning, merging, changing lanes, and backing up.
Make sure to practice these maneuvers and skills before attempting the CDL Doubles/Triples endorsement test, either on your own or through specialized training. It's important to be confident in your abilities before taking the test to ensure you pass and can safely operate a commercial vehicle with Doubles/Triples attached in the future.
In District of Columbia, to get a CDL Doubles/Triples endorsement, you will need to pass a written test and a skills test that specifically covers the operation of commercial motor vehicles with double/triple trailers. Once you pass these tests, the endorsement will be added to your CDL.
It's important to note that driving a CMV with double/triple trailers can be more difficult and requires additional skills and training than operating a single trailer vehicle. This is why the CDL Doubles/Triples endorsement is required.
If you are caught operating a CMV with double/triple trailers without the appropriate endorsement, you may face fines, penalties, and even loss of your CDL. It's important to always follow federal regulations and obtain the necessary endorsements and certifications before operating any commercial vehicle.
To add the endorsement, you will need to pass a written test and a skills test that specifically covers the operation of commercial motor vehicles with double/triple trailers. You can study for the written test using study materials provided by the District of Columbia Department of Motor Vehicles (DMV) or through commercial training programs.
Once you have passed the tests, you will need to visit a DMV office to have the endorsement added to your CDL license. You will need to pay a fee for the endorsement, and your license will be updated to reflect that you are authorized to operate double/triple trailers.
It's important to note that if your CDL license is due for renewal soon, you may want to wait until then to add the endorsement. This can save you time and money by allowing you to add the endorsement at the same time as your renewal.
1. You may only operate a commercial motor vehicle with double/triple trailers if you have the CDL Doubles/Triples endorsement on your license.
2. You may only operate double/triple trailers that are connected in a specific way as outlined in federal regulations.
3. You may not exceed the maximum weight limit for the combination of vehicles you are operating.
4. You may not operate double/triple trailers on certain roads or highways that are restricted by state or federal law.
5. You must follow all other rules and regulations that apply to commercial motor vehicle operators, such as hours of service limitations and safety requirements.
It's important to understand these restrictions and follow them carefully to ensure your safety and compliance with the law. Violating these restrictions can result in fines, penalties, and even loss of your CDL license.
1. Maximum Weight: The total weight of the combination of vehicles cannot exceed 80,000 pounds, including cargo. However, if the combination of vehicles is equipped with a multi-axle trailer, the weight limit may be increased to 86,000 pounds.
2. Maximum Length: The maximum overall length of the combination of vehicles cannot exceed 28 feet for each trailer in the combination.
It's important to note that these weight and length limits are subject to federal and state regulations, and they may vary depending on the specific type of commercial motor vehicle you are operating. You should always consult current regulations and guidelines to ensure that you are in compliance with all applicable laws.
1. Properly securing all cargo to prevent shifting or loss during transport.
2. Maintaining proper distance from other vehicles on the road and avoiding sudden lane changes or turns.
3. Maintaining adequate braking distance and using proper braking techniques, such as gradually applying the brakes and avoiding sudden stops.
4. Ensuring that all brakes and lights on the commercial motor vehicle are functioning properly before driving.
5. Following all federal and state regulations related to hours of service, rest breaks, and maximum driving time.
In addition to these safety considerations, there are also specific regulations that apply to double/triple trailers, including restrictions on certain roads or highways, as well as requirements for special equipment and training. It's important to stay up-to-date with all applicable regulations and guidelines to ensure that you are operating your commercial motor vehicle safely and in compliance with the law.