Tank
This endorsement is required to haul any liquid or gaseous materials in a tank or tanks having a capacity of 1,000 gallons or more that is either permanently or temporarily attached to the vehicle or chassis. To receive this endorsement, applicants must pass a test. The test consists of 20 multiple choice questions. Each question has three or four possible answer choices. To pass, the applicant must answer at least 16 questions correctly. Test questions come from the Montana Commercial Driver License Manual. Questions come from chapters covering: Driving Safely, Tank Vehicles, Hazardous Materials and Combination Vehicles. The Tank endorsement can be used with the Class A, B or C CDL.
Number of Question
Passing Score
8. When driving in fog, you should:
Explanation
It is best not to avoid driving in fog. However, if you must drive under foggy conditions, be sure to decrease your speed.
9. Baffled tanks:
Explanation
Baffled tanks contain bulkheads with holes to help control the movement of liquid cargo. These bulkheads lower the risk of front-to-back surge, though side-to-side surge may still occur.
10. If a driver begins to feel fatigued while driving, they should:
Explanation
If you begin to feel drowsy while driving, the only safe response is to safely leave the road and get some sleep. Using artificial stimulants can be dangerous because they may cause extreme fatigue when they begin to wear off.
11. When a tank that is divided by bulkheads is being loaded with liquid cargo, most of the weight should be placed:
Explanation
When filling a tank that is divided by bulkheads, make sure that you do not place too much weight on the front or rear of the vehicle.
12. If coolant has to be added to a system without a recovery tank, you should:
Explanation
Before adding coolant to a system without a recovery or overflow tank, you must turn the engine off and wait until it cools. Use gloves or a thick cloth to protect your hands. To release the pressure seal, turn the radiator cap slowly to the first stop.
13. If an unusual noise or feeling occurs in a vehicle while it is being driven, the driver should:
Explanation
If you see, hear, smell, or feel anything while driving that does not feel right, you should have it checked out.
14. An explosive material is most likely categorized as a ____ hazard.
Explanation
Class 1 hazardous materials are typically items that present certain explosion or fire hazards.
Frequently Asked Questions
To obtain a CDL Tank endorsement in Montana, you will need to follow these steps:
1. Obtain a Montana Commercial Driver's License (CDL): You must have a valid Montana CDL before you can obtain any endorsements. To obtain a CDL, you will need to pass a written knowledge exam and a skills test.
2. Meet the eligibility requirements: To apply for a Tank endorsement, you must be at least 21 years old, have a valid Montana CDL, and pass a written knowledge exam.
3. Study for the Tank endorsement exam: You can obtain study materials from the Montana Motor Vehicle Division (MVD) or from third-party providers.
4. Schedule and pass the Tank endorsement knowledge test: You can schedule your exam appointment online or by visiting an MVD office. The Tank endorsement knowledge test consists of 20 multiple-choice questions. You must answer at least 80% of the questions correctly to pass.
5. Pay the Tank endorsement fee: The fee for obtaining a Tank endorsement is $16 in addition to any other fees associated with obtaining or renewing your CDL.
6. Take your Tank endorsement skills test: Once you have passed the Tank endorsement knowledge test and paid the fee, you can schedule your skills test with an approved examiner. The skills test will include a pre-trip inspection, basic vehicle control, and an on-road driving test.
7. Receive your CDL with Tank endorsement: If you pass your skills test, you will receive your Montana CDL with the Tank endorsement. Your Tank endorsement is valid for four years and must be renewed when you renew your CDL.
It is important to note that additional requirements may apply depending on the type of tank vehicle you plan to operate (e.g., hazardous materials). Be sure to check with the Montana MVD for specific requirements related to your situation.
1. Obtain a Montana Commercial Driver's License (CDL): You must have a valid Montana CDL before you can obtain any endorsements. To obtain a CDL, you will need to pass a written knowledge exam and a skills test.
2. Meet the eligibility requirements: To apply for a Tank endorsement, you must be at least 21 years old, have a valid Montana CDL, and pass a written knowledge exam.
3. Study for the Tank endorsement exam: You can obtain study materials from the Montana Motor Vehicle Division (MVD) or from third-party providers.
4. Schedule and pass the Tank endorsement knowledge test: You can schedule your exam appointment online or by visiting an MVD office. The Tank endorsement knowledge test consists of 20 multiple-choice questions. You must answer at least 80% of the questions correctly to pass.
5. Pay the Tank endorsement fee: The fee for obtaining a Tank endorsement is $16 in addition to any other fees associated with obtaining or renewing your CDL.
6. Take your Tank endorsement skills test: Once you have passed the Tank endorsement knowledge test and paid the fee, you can schedule your skills test with an approved examiner. The skills test will include a pre-trip inspection, basic vehicle control, and an on-road driving test.
7. Receive your CDL with Tank endorsement: If you pass your skills test, you will receive your Montana CDL with the Tank endorsement. Your Tank endorsement is valid for four years and must be renewed when you renew your CDL.
It is important to note that additional requirements may apply depending on the type of tank vehicle you plan to operate (e.g., hazardous materials). Be sure to check with the Montana MVD for specific requirements related to your situation.
To obtain a CDL Tank endorsement in Montana, you must meet the following requirements:
1. Be at least 21 years old: You must be at least 21 years old to transport hazardous materials or operate a tank vehicle with a capacity of 1,000 gallons or more.
2. Have a valid Montana CDL: You must have a valid Montana Commercial Driver's License (CDL) before you can obtain any endorsements. To obtain a CDL, you will need to pass a written knowledge exam and a skills test.
3. Pass the Tank endorsement knowledge test: To obtain a Tank endorsement, you must pass a written knowledge test specifically for the endorsement. The test consists of 20 multiple-choice questions related to tank vehicle operation and safety.
4. Pass the Tank endorsement skills test: You must also pass a skills test that includes a pre-trip inspection, basic vehicle control, and an on-road driving test in a tank vehicle.
5. Pay the Tank endorsement fee: The fee for obtaining a Tank endorsement in Montana is $16 in addition to any other fees associated with obtaining or renewing your CDL.
It is important to note that additional requirements may apply depending on the type of tank vehicle you plan to operate (e.g., hazardous materials). Be sure to check with the Montana Motor Vehicle Division (MVD) for specific requirements related to your situation.
1. Be at least 21 years old: You must be at least 21 years old to transport hazardous materials or operate a tank vehicle with a capacity of 1,000 gallons or more.
2. Have a valid Montana CDL: You must have a valid Montana Commercial Driver's License (CDL) before you can obtain any endorsements. To obtain a CDL, you will need to pass a written knowledge exam and a skills test.
3. Pass the Tank endorsement knowledge test: To obtain a Tank endorsement, you must pass a written knowledge test specifically for the endorsement. The test consists of 20 multiple-choice questions related to tank vehicle operation and safety.
4. Pass the Tank endorsement skills test: You must also pass a skills test that includes a pre-trip inspection, basic vehicle control, and an on-road driving test in a tank vehicle.
5. Pay the Tank endorsement fee: The fee for obtaining a Tank endorsement in Montana is $16 in addition to any other fees associated with obtaining or renewing your CDL.
It is important to note that additional requirements may apply depending on the type of tank vehicle you plan to operate (e.g., hazardous materials). Be sure to check with the Montana Motor Vehicle Division (MVD) for specific requirements related to your situation.
While there is no specific training or experience required to obtain a CDL Tank endorsement in Montana, it is recommended that you receive specialized training before operating a tank vehicle. This is because tank vehicles have unique handling characteristics and pose additional hazards compared to other commercial vehicles.
The Federal Motor Carrier Safety Administration (FMCSA) requires that drivers of tank vehicles carrying hazardous materials receive specialized training and pass a written test prior to operating such vehicles. It is also recommended that drivers of all tank vehicles receive specialized training that covers topics such as:
1. Tank vehicle characteristics, including weight distribution and handling characteristics
2. Loading and unloading procedures
3. Proper use of safety equipment, such as emergency shut-off systems
4. Hazardous materials regulations and safety procedures
5. Tank vehicle inspection and maintenance procedures
6. Emergency response procedures in the event of an accident or spill.
Even if you are not transporting hazardous materials, it is still recommended that you receive specialized training before operating a tank vehicle. This will help ensure your safety as well as the safety of others on the road.
The Federal Motor Carrier Safety Administration (FMCSA) requires that drivers of tank vehicles carrying hazardous materials receive specialized training and pass a written test prior to operating such vehicles. It is also recommended that drivers of all tank vehicles receive specialized training that covers topics such as:
1. Tank vehicle characteristics, including weight distribution and handling characteristics
2. Loading and unloading procedures
3. Proper use of safety equipment, such as emergency shut-off systems
4. Hazardous materials regulations and safety procedures
5. Tank vehicle inspection and maintenance procedures
6. Emergency response procedures in the event of an accident or spill.
Even if you are not transporting hazardous materials, it is still recommended that you receive specialized training before operating a tank vehicle. This will help ensure your safety as well as the safety of others on the road.
Yes, in addition to the regular CDL written knowledge test, you will need to pass a separate written test for the Tank endorsement. The Tank endorsement knowledge test consists of 20 multiple-choice questions that cover topics specific to the operation and safety of tank vehicles, such as identifying potential hazards, proper loading and unloading procedures, and emergency response procedures.
If you plan to transport hazardous materials in a tank vehicle, you will also need to pass the Hazardous Materials endorsement knowledge test. This test consists of 30 multiple-choice questions that cover topics such as hazardous materials regulations and safety procedures, identifying hazardous materials, and proper loading and unloading procedures.
Keep in mind that you must pass the appropriate written tests before you can take the skills test for the Tank or Hazardous Materials endorsements. It is important to study and prepare for these tests to ensure that you are fully prepared before taking them.
If you plan to transport hazardous materials in a tank vehicle, you will also need to pass the Hazardous Materials endorsement knowledge test. This test consists of 30 multiple-choice questions that cover topics such as hazardous materials regulations and safety procedures, identifying hazardous materials, and proper loading and unloading procedures.
Keep in mind that you must pass the appropriate written tests before you can take the skills test for the Tank or Hazardous Materials endorsements. It is important to study and prepare for these tests to ensure that you are fully prepared before taking them.
The CDL Tank endorsement written test covers topics related to the safe operation and handling of tank vehicles. The questions on the test will focus on the following areas:
1. Hazardous materials: This includes identifying hazardous materials, understanding the risks associated with transporting hazardous materials in a tank vehicle, and knowing the proper procedures for handling hazardous materials.
2. Tank vehicle inspection: This involves knowing the proper procedures for inspecting tanks and tank vehicles, identifying potential hazards or defects, and knowing when a tank or vehicle is safe to operate.
3. Loading and unloading: This includes understanding the proper procedures for loading and unloading tanks, knowing how to properly secure tanks, and understanding how to calculate weight distribution.
4. Safe driving practices: This covers topics such as maintaining a safe following distance, understanding how to handle a tank vehicle in adverse weather conditions or emergency situations, and knowing how to properly brake a fully loaded tank vehicle.
5. Federal regulations: You will need to know the federal regulations that apply to the operation of tank vehicles, including those related to hazardous materials transportation.
It is important to study these topics thoroughly before taking the Tank endorsement written test. You can find study materials online or through your state's Department of Motor Vehicles (DMV) website.
1. Hazardous materials: This includes identifying hazardous materials, understanding the risks associated with transporting hazardous materials in a tank vehicle, and knowing the proper procedures for handling hazardous materials.
2. Tank vehicle inspection: This involves knowing the proper procedures for inspecting tanks and tank vehicles, identifying potential hazards or defects, and knowing when a tank or vehicle is safe to operate.
3. Loading and unloading: This includes understanding the proper procedures for loading and unloading tanks, knowing how to properly secure tanks, and understanding how to calculate weight distribution.
4. Safe driving practices: This covers topics such as maintaining a safe following distance, understanding how to handle a tank vehicle in adverse weather conditions or emergency situations, and knowing how to properly brake a fully loaded tank vehicle.
5. Federal regulations: You will need to know the federal regulations that apply to the operation of tank vehicles, including those related to hazardous materials transportation.
It is important to study these topics thoroughly before taking the Tank endorsement written test. You can find study materials online or through your state's Department of Motor Vehicles (DMV) website.
Yes, in addition to passing the written test, you will also need to demonstrate your ability to safely operate a tank vehicle by passing a skills test. The skills test for the Tank endorsement will include several specific maneuvers and skills.
Here are some of the maneuvers and skills that you may be asked to perform during the Tank endorsement skills test:
1. Vehicle inspection: You will need to perform a thorough inspection of your tank vehicle, identifying any potential hazards or defects.
2. Basic controls: You will need to demonstrate your ability to safely operate the tank vehicle's basic controls, such as shifting gears, accelerating, and braking.
3. On-road performance: You will be asked to drive the tank vehicle on public roads while demonstrating safe driving practices, such as maintaining a safe following distance and obeying traffic laws.
4. Tank-specific maneuvers: You will also be asked to perform specific maneuvers that are unique to tank vehicles, such as navigating tight turns or backing up with a fully loaded tank.
5. Emergency procedures: You may be asked to demonstrate your ability to respond appropriately in emergency situations, such as a sudden loss of control or a hazardous materials spill.
It is important to practice these maneuvers and skills before taking the Tank endorsement skills test. Your state's DMV may provide study materials or practice tests that can help you prepare for the test.
Here are some of the maneuvers and skills that you may be asked to perform during the Tank endorsement skills test:
1. Vehicle inspection: You will need to perform a thorough inspection of your tank vehicle, identifying any potential hazards or defects.
2. Basic controls: You will need to demonstrate your ability to safely operate the tank vehicle's basic controls, such as shifting gears, accelerating, and braking.
3. On-road performance: You will be asked to drive the tank vehicle on public roads while demonstrating safe driving practices, such as maintaining a safe following distance and obeying traffic laws.
4. Tank-specific maneuvers: You will also be asked to perform specific maneuvers that are unique to tank vehicles, such as navigating tight turns or backing up with a fully loaded tank.
5. Emergency procedures: You may be asked to demonstrate your ability to respond appropriately in emergency situations, such as a sudden loss of control or a hazardous materials spill.
It is important to practice these maneuvers and skills before taking the Tank endorsement skills test. Your state's DMV may provide study materials or practice tests that can help you prepare for the test.
Yes, drivers with a CDL Tank endorsement are subject to certain restrictions and limitations. These restrictions and limitations are in place to ensure the safe operation of tank vehicles and the transportation of hazardous materials.
Here are some of the restrictions and limitations that apply to drivers with a CDL Tank endorsement:
1. Endorsement-specific restrictions: Depending on the state, you may be subject to specific restrictions that apply only to drivers with a Tank endorsement. For example, some states may require additional endorsements or certifications for drivers who transport certain types of hazardous materials.
2. Age restrictions: Federal regulations require that drivers be at least 21 years old to operate a tank vehicle that is transporting hazardous materials.
3. Endorsement renewal: Your Tank endorsement will need to be renewed periodically, usually every 5 years. You may need to complete additional training or testing to renew your endorsement.
4. Medical certification: Drivers with a CDL Tank endorsement must meet specific medical certification requirements, including passing a physical exam and maintaining a valid medical certificate.
5. Vehicle-specific limitations: Depending on the type of tank vehicle you are driving, there may be additional limitations or requirements that you need to follow. For example, some tank vehicles may require special permits or may only be allowed on certain roads or bridges.
It is important to understand these restrictions and limitations before obtaining your Tank endorsement and while operating a tank vehicle. Violating these restrictions can result in fines, penalties, or even suspension of your CDL license.
Here are some of the restrictions and limitations that apply to drivers with a CDL Tank endorsement:
1. Endorsement-specific restrictions: Depending on the state, you may be subject to specific restrictions that apply only to drivers with a Tank endorsement. For example, some states may require additional endorsements or certifications for drivers who transport certain types of hazardous materials.
2. Age restrictions: Federal regulations require that drivers be at least 21 years old to operate a tank vehicle that is transporting hazardous materials.
3. Endorsement renewal: Your Tank endorsement will need to be renewed periodically, usually every 5 years. You may need to complete additional training or testing to renew your endorsement.
4. Medical certification: Drivers with a CDL Tank endorsement must meet specific medical certification requirements, including passing a physical exam and maintaining a valid medical certificate.
5. Vehicle-specific limitations: Depending on the type of tank vehicle you are driving, there may be additional limitations or requirements that you need to follow. For example, some tank vehicles may require special permits or may only be allowed on certain roads or bridges.
It is important to understand these restrictions and limitations before obtaining your Tank endorsement and while operating a tank vehicle. Violating these restrictions can result in fines, penalties, or even suspension of your CDL license.
No, you cannot transport liquid or gas materials in a tank vehicle without a CDL Tank endorsement. The Federal Motor Carrier Safety Administration (FMCSA) requires drivers to have a Tank endorsement on their commercial driver's license (CDL) if they operate a tank vehicle that is used to transport hazardous materials in bulk quantities.
The FMCSA defines a tank vehicle as any commercial motor vehicle that is designed to transport any liquid or gaseous materials within a tank that has an individual rated capacity of more than 119 gallons and an aggregate rated capacity of 1,000 gallons or more. This includes tanks mounted on a truck chassis, tanks with their own propulsion, and tanks used as portable containers.
If you are caught transporting hazardous materials in a tank vehicle without the proper endorsement, you may face fines, penalties, or even suspension of your CDL license. In addition, transporting hazardous materials without proper training and certification can be extremely dangerous and can lead to accidents or spills that pose a risk to public safety.
Therefore, it is important to obtain the proper endorsements and training before operating any tank vehicle that is used to transport hazardous materials.
The FMCSA defines a tank vehicle as any commercial motor vehicle that is designed to transport any liquid or gaseous materials within a tank that has an individual rated capacity of more than 119 gallons and an aggregate rated capacity of 1,000 gallons or more. This includes tanks mounted on a truck chassis, tanks with their own propulsion, and tanks used as portable containers.
If you are caught transporting hazardous materials in a tank vehicle without the proper endorsement, you may face fines, penalties, or even suspension of your CDL license. In addition, transporting hazardous materials without proper training and certification can be extremely dangerous and can lead to accidents or spills that pose a risk to public safety.
Therefore, it is important to obtain the proper endorsements and training before operating any tank vehicle that is used to transport hazardous materials.
You can add the CDL Tank endorsement to your existing CDL license. To obtain a CDL Tank endorsement, you will need to pass a written test and a skills test that specifically address the safe operation of tank vehicles and the transportation of hazardous materials.
Here are the steps to add a CDL Tank endorsement to your existing CDL license:
1. Study for the Tank endorsement test: You can obtain study materials from your state's Department of Motor Vehicles (DMV) or commercial driver's license (CDL) office. Study materials typically cover topics such as identifying hazardous materials, loading and unloading tank vehicles, and emergency response procedures.
2. Take the written test: Once you feel prepared, schedule an appointment to take the written test for the Tank endorsement at your state's DMV or CDL office. You will need to pass this test in order to move on to the skills test.
3. Prepare for the skills test: The skills test will assess your ability to safely operate a tank vehicle that is used to transport hazardous materials. You can practice for this test by using a tank vehicle simulator or by taking a training course.
4. Take the skills test: Once you feel prepared, schedule an appointment to take the skills test for the Tank endorsement at your state's DMV or CDL office. You will need to demonstrate your ability to safely operate a tank vehicle and transport hazardous materials in order to pass this test.
Once you have passed both tests, your CDL license will be updated to include the Tank endorsement. There may be additional fees associated with obtaining this endorsement, so be sure to check with your state's DMV or CDL office for more information.
Here are the steps to add a CDL Tank endorsement to your existing CDL license:
1. Study for the Tank endorsement test: You can obtain study materials from your state's Department of Motor Vehicles (DMV) or commercial driver's license (CDL) office. Study materials typically cover topics such as identifying hazardous materials, loading and unloading tank vehicles, and emergency response procedures.
2. Take the written test: Once you feel prepared, schedule an appointment to take the written test for the Tank endorsement at your state's DMV or CDL office. You will need to pass this test in order to move on to the skills test.
3. Prepare for the skills test: The skills test will assess your ability to safely operate a tank vehicle that is used to transport hazardous materials. You can practice for this test by using a tank vehicle simulator or by taking a training course.
4. Take the skills test: Once you feel prepared, schedule an appointment to take the skills test for the Tank endorsement at your state's DMV or CDL office. You will need to demonstrate your ability to safely operate a tank vehicle and transport hazardous materials in order to pass this test.
Once you have passed both tests, your CDL license will be updated to include the Tank endorsement. There may be additional fees associated with obtaining this endorsement, so be sure to check with your state's DMV or CDL office for more information.
Yes, there are specific requirements and regulations for handling hazardous materials with a CDL Tank endorsement. The Federal Motor Carrier Safety Administration (FMCSA) has established strict rules and guidelines for the safe transportation of hazardous materials in tank vehicles. Here are some of the key regulations that you would need to follow:
1. Proper training: You must complete a hazardous materials training program that covers topics such as handling and transporting hazardous materials, emergency response procedures, and safety measures for tank vehicles.
2. Vehicle inspections: You must inspect your tank vehicle before each trip to ensure that it is in good working condition and that all safety features are functioning properly.
3. Loading and unloading: You must follow specific procedures for loading and unloading hazardous materials into your tank vehicle to ensure that they are properly secured and do not pose a risk to public safety.
4. Marking and labeling: You must ensure that your tank vehicle is properly marked and labeled with the appropriate identification numbers and warning labels.
5. Reporting incidents: If an incident occurs while transporting hazardous materials, such as a spill or leak, you must report it immediately to the proper authorities.
6. Emergency response: You must be prepared to respond to emergencies while transporting hazardous materials, including knowing how to use emergency equipment such as fire extinguishers or spill kits.
These are just a few of the regulations that you would need to follow when transporting hazardous materials with a CDL Tank endorsement. It is important to familiarize yourself with all applicable regulations in order to ensure that you are operating safely and legally.
1. Proper training: You must complete a hazardous materials training program that covers topics such as handling and transporting hazardous materials, emergency response procedures, and safety measures for tank vehicles.
2. Vehicle inspections: You must inspect your tank vehicle before each trip to ensure that it is in good working condition and that all safety features are functioning properly.
3. Loading and unloading: You must follow specific procedures for loading and unloading hazardous materials into your tank vehicle to ensure that they are properly secured and do not pose a risk to public safety.
4. Marking and labeling: You must ensure that your tank vehicle is properly marked and labeled with the appropriate identification numbers and warning labels.
5. Reporting incidents: If an incident occurs while transporting hazardous materials, such as a spill or leak, you must report it immediately to the proper authorities.
6. Emergency response: You must be prepared to respond to emergencies while transporting hazardous materials, including knowing how to use emergency equipment such as fire extinguishers or spill kits.
These are just a few of the regulations that you would need to follow when transporting hazardous materials with a CDL Tank endorsement. It is important to familiarize yourself with all applicable regulations in order to ensure that you are operating safely and legally.
