Tank
This endorsement is required to haul any liquid or gaseous materials in a tank or tanks having a capacity of 1,000 gallons or more that is either permanently or temporarily attached to the vehicle or chassis. To receive this endorsement, applicants must pass a test. The test consists of 20 multiple choice questions. Each question has four possible answer choices. To pass, the applicant must answer at least 16 questions correctly. Test questions come from the New Hampshire CDL Driver’s Guide. Questions come from chapters covering: Driving Safely, Tank Vehicles, Hazardous Materials and Combination Vehicles. The Tank endorsement can be used with the Class A, B or C CDL.
Number of Question
Passing Score
15. If you must back up, it is helpful to:
Explanation
If you must back up, you should exit the cab and check your path for obstacles before beginning the maneuver. Drive as slowly as you can, checking your mirrors on both sides.
16. Slippery roadways usually:
Explanation
It takes a longer distance to stop a vehicle on a slippery road than it does on a dry road. Use caution when driving under conditions that could cause a road surface to become slippery.
17. When trying to control a minor truck fire, what should you do before opening trailer doors?
Explanation
If you are experiencing a truck fire, you should not attempt to open trailer doors without first feeling the doors to see if they are hot. If the doors are hot, there may be a cargo fire. Leave the doors closed if there is a cargo fire.
18. When passing another vehicle, you should:
Explanation
It is always safest to assume that other drivers, bicyclists, and pedestrians don't see you. Be prepared for the possibility that they may suddenly move into your path. It may be safe to lightly tap your horn or flash your lights as you pass.
19. When driving a tank, a surge:
Explanation
Partially-filled tanks of liquid cargo can be vulnerable to surge. Liquid surge is an occurrence in which a wave of liquid sloshes from one end or side of a tank to the other, causing dangerous effects on handling.
20. Escape ramps are:
Explanation
Escape ramps are constructed in areas with steep downgrades to allow a means of safely stopping runaway vehicles. They consist of a long bed of loose, soft material, and sometimes an uphill slope.
Frequently Asked Questions
To obtain a CDL Tank endorsement in New Hampshire, you must follow these steps:
1. Meet the eligibility requirements: You must hold a valid New Hampshire CDL and pass the hazardous materials knowledge test.
2. Obtain a Tanker Vehicle (N) Endorsement: To obtain a Tanker Vehicle (N) endorsement, you must pass a knowledge test that covers topics such as loading and unloading tank vehicles, safe driving practices, and inspection of tank vehicles. You can schedule an appointment with the DMV to take the test.
3. Submit Medical Certificate: You must submit a current Medical Examiner's Certificate (MEC) to the DMV.
4. Pay the fees: There is a fee to obtain a CDL Tank endorsement in New Hampshire. You can pay this fee at the time of application.
5. Practice driving and obtain on-the-job training: To become proficient in driving tank vehicles, you may need to practice driving with an experienced driver or take specialized training.
6. Pass the skills test: You must pass a skills test that demonstrates your ability to safely operate a tank vehicle.
7. Receive your CDL Tank endorsement: Once you have completed all of the above steps, you will receive your CDL Tank endorsement from the DMV.
Note: It is important to keep in mind that obtaining a Tanker endorsement is just one part of obtaining a CDL with endorsements in New Hampshire. You may also need to obtain other endorsements depending on the type of commercial vehicle you plan to operate.
1. Meet the eligibility requirements: You must hold a valid New Hampshire CDL and pass the hazardous materials knowledge test.
2. Obtain a Tanker Vehicle (N) Endorsement: To obtain a Tanker Vehicle (N) endorsement, you must pass a knowledge test that covers topics such as loading and unloading tank vehicles, safe driving practices, and inspection of tank vehicles. You can schedule an appointment with the DMV to take the test.
3. Submit Medical Certificate: You must submit a current Medical Examiner's Certificate (MEC) to the DMV.
4. Pay the fees: There is a fee to obtain a CDL Tank endorsement in New Hampshire. You can pay this fee at the time of application.
5. Practice driving and obtain on-the-job training: To become proficient in driving tank vehicles, you may need to practice driving with an experienced driver or take specialized training.
6. Pass the skills test: You must pass a skills test that demonstrates your ability to safely operate a tank vehicle.
7. Receive your CDL Tank endorsement: Once you have completed all of the above steps, you will receive your CDL Tank endorsement from the DMV.
Note: It is important to keep in mind that obtaining a Tanker endorsement is just one part of obtaining a CDL with endorsements in New Hampshire. You may also need to obtain other endorsements depending on the type of commercial vehicle you plan to operate.
To obtain a CDL Tank license in New Hampshire, you must meet the following requirements:
1. Be at least 21 years old: You must be at least 21 years old to operate a commercial vehicle across state lines or transport hazardous materials.
2. Hold a valid New Hampshire driver's license: You must hold a valid New Hampshire driver's license and have a clean driving record.
3. Obtain a commercial learner's permit (CLP): Before you can apply for a CDL with a Tank endorsement, you must obtain a CLP and hold it for at least 14 days. To obtain a CLP, you must pass the written knowledge test and meet all other eligibility requirements.
4. Pass the CDL Tanker endorsement knowledge test: You must pass a knowledge test that covers topics such as loading and unloading tank vehicles, safe driving practices, and inspection of tank vehicles.
5. Submit your Medical Examiner's Certificate (MEC): You must submit a current MEC that shows you are physically qualified to operate a commercial vehicle.
6. Pass the skills test: You must pass a skills test that demonstrates your ability to safely operate a tank vehicle. The skills test will include pre-trip inspections, basic control skills tests, and an on-road driving test.
7. Pay the fees: There are fees associated with obtaining a CDL Tank license in New Hampshire. You can pay these fees at the time of application.
Note: It is important to keep in mind that obtaining a CDL with Tank endorsement is just one part of obtaining your CDL in New Hampshire. Depending on the type of commercial vehicle you plan to operate, you may also need to obtain other endorsements such as Hazmat or Double/Triple trailers.
1. Be at least 21 years old: You must be at least 21 years old to operate a commercial vehicle across state lines or transport hazardous materials.
2. Hold a valid New Hampshire driver's license: You must hold a valid New Hampshire driver's license and have a clean driving record.
3. Obtain a commercial learner's permit (CLP): Before you can apply for a CDL with a Tank endorsement, you must obtain a CLP and hold it for at least 14 days. To obtain a CLP, you must pass the written knowledge test and meet all other eligibility requirements.
4. Pass the CDL Tanker endorsement knowledge test: You must pass a knowledge test that covers topics such as loading and unloading tank vehicles, safe driving practices, and inspection of tank vehicles.
5. Submit your Medical Examiner's Certificate (MEC): You must submit a current MEC that shows you are physically qualified to operate a commercial vehicle.
6. Pass the skills test: You must pass a skills test that demonstrates your ability to safely operate a tank vehicle. The skills test will include pre-trip inspections, basic control skills tests, and an on-road driving test.
7. Pay the fees: There are fees associated with obtaining a CDL Tank license in New Hampshire. You can pay these fees at the time of application.
Note: It is important to keep in mind that obtaining a CDL with Tank endorsement is just one part of obtaining your CDL in New Hampshire. Depending on the type of commercial vehicle you plan to operate, you may also need to obtain other endorsements such as Hazmat or Double/Triple trailers.
In New Hampshire, there are no specific training or experience requirements to obtain a CDL Tank endorsement. However, it is recommended that you have some experience driving commercial vehicles before attempting to obtain a Tanker endorsement.
Tank vehicles have unique handling characteristics due to the weight and movement of the liquid cargo they carry. It's important to understand how to handle these vehicles safely and effectively, especially when operating on hills, curves, or other challenging road conditions.
Some employers may require specialized training or on-the-job experience before allowing you to operate a tank vehicle. It's important to check with potential employers about their specific requirements for tank vehicle operation.
Additionally, the Federal Motor Carrier Safety Administration (FMCSA) requires drivers who transport hazardous materials by tanker to complete specialized training in hazardous materials handling and transportation. This training must be provided by an approved Hazmat instructor and includes classroom instruction, hands-on training, and a written test.
Overall, while there are no specific New Hampshire state requirements for training or experience to obtain a Tanker endorsement, it's important to ensure that you have the knowledge and skills necessary to safely operate these specialized vehicles.
Tank vehicles have unique handling characteristics due to the weight and movement of the liquid cargo they carry. It's important to understand how to handle these vehicles safely and effectively, especially when operating on hills, curves, or other challenging road conditions.
Some employers may require specialized training or on-the-job experience before allowing you to operate a tank vehicle. It's important to check with potential employers about their specific requirements for tank vehicle operation.
Additionally, the Federal Motor Carrier Safety Administration (FMCSA) requires drivers who transport hazardous materials by tanker to complete specialized training in hazardous materials handling and transportation. This training must be provided by an approved Hazmat instructor and includes classroom instruction, hands-on training, and a written test.
Overall, while there are no specific New Hampshire state requirements for training or experience to obtain a Tanker endorsement, it's important to ensure that you have the knowledge and skills necessary to safely operate these specialized vehicles.
Yes, to obtain a CDL Tank endorsement in New Hampshire, you will need to pass an additional written test specifically for Tanker vehicles. This test covers topics such as:
1. Tanker vehicle inspection: You will be tested on your knowledge of the inspection process for a tanker vehicle, including the inspection of valves, pumps, hoses, and other equipment.
2. Loading and unloading procedures: You will be tested on your knowledge of the procedures for loading and unloading liquids, gases, and other materials into and out of a tanker vehicle.
3. Safe driving practices: You will be tested on your knowledge of safety practices specific to operating a tanker vehicle, including how to handle a vehicle's weight distribution and how to drive safely in hazardous conditions.
4. Emergency response: You will be tested on your knowledge of how to respond in the event of an emergency involving a tanker vehicle, including proper procedures for stopping and dealing with spills or leaks.
It's important to note that the Tanker endorsement test is in addition to the general CDL knowledge test that all commercial driver's license applicants must pass. To obtain a CDL with a Tanker endorsement in New Hampshire, you must pass both the general knowledge test and the Tanker endorsement test.
1. Tanker vehicle inspection: You will be tested on your knowledge of the inspection process for a tanker vehicle, including the inspection of valves, pumps, hoses, and other equipment.
2. Loading and unloading procedures: You will be tested on your knowledge of the procedures for loading and unloading liquids, gases, and other materials into and out of a tanker vehicle.
3. Safe driving practices: You will be tested on your knowledge of safety practices specific to operating a tanker vehicle, including how to handle a vehicle's weight distribution and how to drive safely in hazardous conditions.
4. Emergency response: You will be tested on your knowledge of how to respond in the event of an emergency involving a tanker vehicle, including proper procedures for stopping and dealing with spills or leaks.
It's important to note that the Tanker endorsement test is in addition to the general CDL knowledge test that all commercial driver's license applicants must pass. To obtain a CDL with a Tanker endorsement in New Hampshire, you must pass both the general knowledge test and the Tanker endorsement test.
The CDL Tank endorsement written test covers specific topics related to the safe operation of tanker vehicles. Here are some of the topics that may be covered in the test:
1. Inspection of Tank Vehicles: You will be tested on your knowledge of how to perform a pre-trip inspection on a tanker vehicle, including checking the tank's structural integrity, valves, pumps, hoses, and other equipment.
2. Safe Driving Practices: You will be tested on your knowledge of safe driving practices when operating a tanker vehicle, including how to handle a vehicle's weight distribution and how to drive safely in hazardous conditions.
3. Loading and Unloading Procedures: You will be tested on your knowledge of the procedures for loading and unloading liquids, gases, and other materials into and out of a tanker vehicle.
4. Hazardous Materials Transportation: You will be tested on your knowledge of the regulations for transporting hazardous materials in a tanker vehicle, including labeling requirements, placarding requirements, and emergency response procedures.
5. Emergency Response: You will be tested on your knowledge of how to respond in the event of an emergency involving a tanker vehicle, including proper procedures for stopping and dealing with spills or leaks.
6. Specialized Equipment: You may be tested on your knowledge of specialized equipment used in tanker operations, including pumps, hoses, safety equipment, and other devices.
It's important to thoroughly study all of these topics before taking the Tank endorsement written test to ensure that you are fully prepared to operate a tanker vehicle safely and effectively.
1. Inspection of Tank Vehicles: You will be tested on your knowledge of how to perform a pre-trip inspection on a tanker vehicle, including checking the tank's structural integrity, valves, pumps, hoses, and other equipment.
2. Safe Driving Practices: You will be tested on your knowledge of safe driving practices when operating a tanker vehicle, including how to handle a vehicle's weight distribution and how to drive safely in hazardous conditions.
3. Loading and Unloading Procedures: You will be tested on your knowledge of the procedures for loading and unloading liquids, gases, and other materials into and out of a tanker vehicle.
4. Hazardous Materials Transportation: You will be tested on your knowledge of the regulations for transporting hazardous materials in a tanker vehicle, including labeling requirements, placarding requirements, and emergency response procedures.
5. Emergency Response: You will be tested on your knowledge of how to respond in the event of an emergency involving a tanker vehicle, including proper procedures for stopping and dealing with spills or leaks.
6. Specialized Equipment: You may be tested on your knowledge of specialized equipment used in tanker operations, including pumps, hoses, safety equipment, and other devices.
It's important to thoroughly study all of these topics before taking the Tank endorsement written test to ensure that you are fully prepared to operate a tanker vehicle safely and effectively.
The CDL Tank endorsement test in New Hampshire is a written exam. However, in addition to passing the written test, you will also need to demonstrate your skills and ability to operate a tanker vehicle safely. To do this, you will need to undergo a practical skills test that includes specific maneuvers and skills related to operating a tanker vehicle.
Here are some of the skills and maneuvers you may need to demonstrate during the CDL Tank endorsement test:
1. Basic control: You may be required to show that you can safely control the tanker vehicle by performing maneuvers such as backing up, turning, and parking.
2. Pre-trip inspection: You will need to demonstrate your knowledge of how to perform a pre-trip inspection on a tanker vehicle, including checking the tank's structural integrity, valves, pumps, hoses, and other equipment.
3. Loading and unloading procedures: You may be required to demonstrate your ability to safely load and unload liquids or gases from a tanker vehicle.
4. Emergency response: You may be required to demonstrate your knowledge of how to respond in the event of an emergency involving a tanker vehicle, including proper procedures for stopping and dealing with spills or leaks.
It's important to note that the specific skills and maneuvers required during the CDL Tank endorsement test can vary depending on the testing location and the examiner. Be sure to review the New Hampshire Commercial Driver License Manual for Tank Vehicles for more information on what you can expect during the practical skills test.
Here are some of the skills and maneuvers you may need to demonstrate during the CDL Tank endorsement test:
1. Basic control: You may be required to show that you can safely control the tanker vehicle by performing maneuvers such as backing up, turning, and parking.
2. Pre-trip inspection: You will need to demonstrate your knowledge of how to perform a pre-trip inspection on a tanker vehicle, including checking the tank's structural integrity, valves, pumps, hoses, and other equipment.
3. Loading and unloading procedures: You may be required to demonstrate your ability to safely load and unload liquids or gases from a tanker vehicle.
4. Emergency response: You may be required to demonstrate your knowledge of how to respond in the event of an emergency involving a tanker vehicle, including proper procedures for stopping and dealing with spills or leaks.
It's important to note that the specific skills and maneuvers required during the CDL Tank endorsement test can vary depending on the testing location and the examiner. Be sure to review the New Hampshire Commercial Driver License Manual for Tank Vehicles for more information on what you can expect during the practical skills test.
Yes, there are restrictions and limitations for drivers with a CDL Tank endorsement. These restrictions and limitations are in place to ensure the safety of the driver, the vehicle, and other drivers on the road. Here are some of the restrictions and limitations that may apply to drivers with a CDL Tank endorsement:
1. Endorsement-specific restriction: Drivers with a CDL Tank endorsement may only operate tanker vehicles that are transporting liquids or gases. They cannot operate vehicles that transport dry bulk materials, such as grain or sand.
2. Special training requirement: Drivers with a CDL Tank endorsement are required to complete specialized training in order to safely operate tanker vehicles. This training must be completed before the driver can apply for the endorsement.
3. Hazardous materials restriction: If a driver is transporting hazardous materials in addition to liquids or gases, they may also need to have a Hazardous Materials (HazMat) endorsement on their CDL.
4. Vehicle-specific restrictions: The specific vehicle that a driver is operating may also have certain restrictions or limitations based on its size, weight, or other factors.
It's important for drivers with a CDL Tank endorsement to be aware of these restrictions and limitations in order to ensure they are operating their vehicle safely and within the parameters of their license.
1. Endorsement-specific restriction: Drivers with a CDL Tank endorsement may only operate tanker vehicles that are transporting liquids or gases. They cannot operate vehicles that transport dry bulk materials, such as grain or sand.
2. Special training requirement: Drivers with a CDL Tank endorsement are required to complete specialized training in order to safely operate tanker vehicles. This training must be completed before the driver can apply for the endorsement.
3. Hazardous materials restriction: If a driver is transporting hazardous materials in addition to liquids or gases, they may also need to have a Hazardous Materials (HazMat) endorsement on their CDL.
4. Vehicle-specific restrictions: The specific vehicle that a driver is operating may also have certain restrictions or limitations based on its size, weight, or other factors.
It's important for drivers with a CDL Tank endorsement to be aware of these restrictions and limitations in order to ensure they are operating their vehicle safely and within the parameters of their license.
No, you cannot transport liquid or gas materials without a CDL Tank endorsement if the combined weight of the vehicle and its contents exceeds 26,000 pounds or if the vehicle is designed to transport 16 or more passengers.
In New Hampshire, a CDL Tank endorsement is required for anyone who operates a commercial motor vehicle (CMV) that is designed to transport liquids or gases in bulk containers of 1,000 gallons or more, or multiple smaller containers totaling 1,000 gallons or more. This means that if you are transporting these materials in a tanker truck or other similar vehicle, you must have a CDL Tank endorsement.
It's important to note that there are other requirements for transporting hazardous materials and other types of cargo that may also require additional endorsements or certifications. It's always best to check with the New Hampshire DMV and the Federal Motor Carrier Safety Administration (FMCSA) to ensure you have all the necessary endorsements and certifications to legally transport your cargo.
In New Hampshire, a CDL Tank endorsement is required for anyone who operates a commercial motor vehicle (CMV) that is designed to transport liquids or gases in bulk containers of 1,000 gallons or more, or multiple smaller containers totaling 1,000 gallons or more. This means that if you are transporting these materials in a tanker truck or other similar vehicle, you must have a CDL Tank endorsement.
It's important to note that there are other requirements for transporting hazardous materials and other types of cargo that may also require additional endorsements or certifications. It's always best to check with the New Hampshire DMV and the Federal Motor Carrier Safety Administration (FMCSA) to ensure you have all the necessary endorsements and certifications to legally transport your cargo.
You can add the CDL Tank endorsement to your existing CDL license, you do not need to apply for a new license.
To add the CDL Tank endorsement to your license, you will need to pass the appropriate knowledge and skills tests, as well as any other requirements that may be necessary in your state. The knowledge test will cover topics such as tanker vehicle inspection, proper loading and unloading procedures, and safe driving practices for tank vehicles. The skills test will evaluate your ability to operate a tank vehicle safely on the road.
Once you have passed the required tests and met all other requirements, you will be issued a new CDL with the Tank endorsement added to it. It's important to remember that you must maintain all necessary endorsements and certifications in order to legally operate your commercial motor vehicle.
It's always best to check with the New Hampshire DMV or a certified CDL training school for information on how to add a CDL Tank endorsement to your license, as requirements can vary by state.
To add the CDL Tank endorsement to your license, you will need to pass the appropriate knowledge and skills tests, as well as any other requirements that may be necessary in your state. The knowledge test will cover topics such as tanker vehicle inspection, proper loading and unloading procedures, and safe driving practices for tank vehicles. The skills test will evaluate your ability to operate a tank vehicle safely on the road.
Once you have passed the required tests and met all other requirements, you will be issued a new CDL with the Tank endorsement added to it. It's important to remember that you must maintain all necessary endorsements and certifications in order to legally operate your commercial motor vehicle.
It's always best to check with the New Hampshire DMV or a certified CDL training school for information on how to add a CDL Tank endorsement to your license, as requirements can vary by state.
Yes, there are specific requirements and regulations for handling hazardous materials with a CDL Tank endorsement. Hazardous materials are defined as any substance or material that poses a risk to health, safety, or property during transportation.
To transport hazardous materials with a CDL Tank endorsement, you must also have a Hazardous Materials (HazMat) endorsement. You will need to pass additional knowledge and skills tests related to the safe handling and transportation of hazardous materials.
In addition to the HazMat endorsement, there are several other regulations that must be followed when transporting hazardous materials. These regulations are established by the Federal Motor Carrier Safety Administration (FMCSA) and include:
1. Proper labeling and marking of hazardous materials containers
2. Proper loading and unloading procedures
3. Use of appropriate personal protective equipment (PPE)
4. Compliance with route restrictions and other safety requirements
5. Emergency response procedures in case of an accident or spill
It's important to note that violations of hazardous materials regulations can result in severe penalties, including fines and suspension or revocation of your CDL. It's always best to stay up-to-date on the latest regulations and procedures for handling hazardous materials, and to seek out additional training or certifications if necessary.
To transport hazardous materials with a CDL Tank endorsement, you must also have a Hazardous Materials (HazMat) endorsement. You will need to pass additional knowledge and skills tests related to the safe handling and transportation of hazardous materials.
In addition to the HazMat endorsement, there are several other regulations that must be followed when transporting hazardous materials. These regulations are established by the Federal Motor Carrier Safety Administration (FMCSA) and include:
1. Proper labeling and marking of hazardous materials containers
2. Proper loading and unloading procedures
3. Use of appropriate personal protective equipment (PPE)
4. Compliance with route restrictions and other safety requirements
5. Emergency response procedures in case of an accident or spill
It's important to note that violations of hazardous materials regulations can result in severe penalties, including fines and suspension or revocation of your CDL. It's always best to stay up-to-date on the latest regulations and procedures for handling hazardous materials, and to seek out additional training or certifications if necessary.
