Knowledge Test Class A
This license is required for driving any legal combination of vehicles, with a gross combination weight rating of 26,001 pounds or more, provided the GVWR of a trailer exceeds 10,000 pounds. To receive this license, applicants must pass a 50-question test. Test questions come from the Ohio Commercial Drivers License Manual. To pass, applicants must answer 40 questions correctly. Questions come from chapters covering: Introduction, Driving Safely, Transporting Cargo Safely, Air Brakes (if applicable), Combination Vehicles, Pre-Trip Vehicle Inspection Test, Basic Vehicle Control Skills Test and On-Road Driving. Endorsements that may be used with a Class A CDL are: Hazardous materials, Tank, Passenger, Doubles/Triples, HazMat, Tank, Air Brakes and School bus.
Number of Question
Passing Score
22. During the driving test, the examiner will be scoring you on:
Explanation
During the on-road driving test, the examiner will be score you on specific driving maneuvers as well as on your general driving behavior. You must drive in a safe and responsible manner; obey all traffic signs, signals, and laws; and not cause an accident or commit a moving violation.
23. If turning to avoid a hazard:
Explanation
You should not brake while making a quick turn to avoid a hazard. Doing so could cause your wheels to lock and make your vehicle skid out of control.
24. Pre-trip inspections are:
Explanation
Federal and state laws require drivers to inspect their vehicles before every trip, regardless of length.
25. When exiting a vehicle, it is important to maintain ____ with your vehicle at all times.
Explanation
As you exit your vehicle during the basic vehicle control skills test, you must face the vehicle and maintain three points of contact at all times. If your testing vehicle is a bus, you must maintain contact with the handrail. Exiting the vehicle incorrectly may result in automatic failure of the basic control skills test.
26. When braking with ABS, you should:
Explanation
When braking a vehicle equipped with an Anti-Lock Braking System (ABS), you should not brake any differently than you would if driving a vehicle with a different braking system.
27. Rust around wheel nuts may mean:
Explanation
Rust around wheel nuts may mean that they are loose. Check the tightness of the nuts if you see any rust in the area.
28. If you are turning left at an intersection where there are two available turn lanes:
Explanation
You may have to swing right to safely make a left turn. If there are two left turn lanes available at an intersection, you should always begin your turn in the rightmost lane.
Frequently Asked Questions
A Class A CDL (Commercial Driver's License) is a type of license required to operate a combination of vehicles with a total weight of 26,001 pounds or more with the towed vehicle weighing more than 10,000 pounds. This type of license is required for drivers who operate tractor-trailers, tanker trucks, and other large commercial vehicles.
To obtain a Class A CDL in Ohio, you must:
1. Be at least 18 years old (21 years old for interstate driving).
2. Hold a valid Ohio driver’s license.
3. Obtain a Commercial Learner’s Permit (CLP) by passing a written test and obtaining a medical certificate.
4. Complete a minimum of 160 hours of training from an approved driving school or a training program.
5. Pass a skills test that includes a pre-trip inspection, basic vehicle control, and on-road driving test.
6. Submit the required documentation and pay the necessary fees.
It's important to note that there may be additional requirements or restrictions based on your specific situation and the type of commercial vehicle you plan to operate.
To obtain a Class A CDL in Ohio, you must:
1. Be at least 18 years old (21 years old for interstate driving).
2. Hold a valid Ohio driver’s license.
3. Obtain a Commercial Learner’s Permit (CLP) by passing a written test and obtaining a medical certificate.
4. Complete a minimum of 160 hours of training from an approved driving school or a training program.
5. Pass a skills test that includes a pre-trip inspection, basic vehicle control, and on-road driving test.
6. Submit the required documentation and pay the necessary fees.
It's important to note that there may be additional requirements or restrictions based on your specific situation and the type of commercial vehicle you plan to operate.
With a Class A CDL, you can operate a combination of vehicles with a total weight of 26,001 pounds or more, provided that the towed vehicle(s) weigh more than 10,000 pounds. Some examples of vehicles you can operate with a Class A CDL include:
1. Tractor-trailers
2. Truck and trailer combinations
3. Livestock carriers
4. Tanker trucks
5. Flatbeds with oversized loads
6. Double or triple trailers
It's important to note that there may be additional endorsements or certifications required to operate certain types of commercial vehicles, such as hazardous materials or passenger vehicles. It's always best to check with the Ohio Bureau of Motor Vehicles (BMV) for specific requirements and regulations.
1. Tractor-trailers
2. Truck and trailer combinations
3. Livestock carriers
4. Tanker trucks
5. Flatbeds with oversized loads
6. Double or triple trailers
It's important to note that there may be additional endorsements or certifications required to operate certain types of commercial vehicles, such as hazardous materials or passenger vehicles. It's always best to check with the Ohio Bureau of Motor Vehicles (BMV) for specific requirements and regulations.
To obtain a Class A CDL (Commercial Driver's License) in Ohio, you must meet the following requirements:
1. Be at least 18 years old (21 years old for interstate driving)
2. Have a valid Ohio driver’s license
3. Obtain a Commercial Learner’s Permit (CLP) by passing a written test and obtaining a medical certificate
4. Complete a minimum of 160 hours of training from an approved driving school or training program
5. Pass a skills test that includes a pre-trip inspection, basic vehicle control, and on-road driving test
6. Submit the required documentation and pay the necessary fees
Additionally, you must pass a vision test and provide proof of citizenship or legal presence in the United States. You must also provide your Social Security Number and disclose any medical conditions that may affect your ability to drive safely.
It's important to note that there may be additional requirements or restrictions based on your specific situation and the type of commercial vehicle you plan to operate.
1. Be at least 18 years old (21 years old for interstate driving)
2. Have a valid Ohio driver’s license
3. Obtain a Commercial Learner’s Permit (CLP) by passing a written test and obtaining a medical certificate
4. Complete a minimum of 160 hours of training from an approved driving school or training program
5. Pass a skills test that includes a pre-trip inspection, basic vehicle control, and on-road driving test
6. Submit the required documentation and pay the necessary fees
Additionally, you must pass a vision test and provide proof of citizenship or legal presence in the United States. You must also provide your Social Security Number and disclose any medical conditions that may affect your ability to drive safely.
It's important to note that there may be additional requirements or restrictions based on your specific situation and the type of commercial vehicle you plan to operate.
The minimum age requirement for obtaining a Class A CDL (Commercial Driver's License) in Ohio is 18 years old. However, drivers who are between the ages of 18 and 21 are limited to driving within the state of Ohio and cannot operate commercial vehicles transporting hazardous materials or oversized loads.
Drivers who are 21 years old or older can operate commercial vehicles across state lines and transport hazardous materials or oversized loads, provided they meet all other federal and state requirements.
Drivers who are 21 years old or older can operate commercial vehicles across state lines and transport hazardous materials or oversized loads, provided they meet all other federal and state requirements.
Yes, depending on the type of commercial vehicle you plan to operate, you may need to obtain additional endorsements on your Class A CDL (Commercial Driver’s License). Endorsements are added to your CDL to show that you have the necessary knowledge and skills to operate certain types of commercial vehicles.
The most common CDL endorsements include:
1. T - Double/Triple Trailers: This endorsement is required for drivers who plan to operate double or triple trailers.
2. P - Passenger: This endorsement is required for drivers who plan to transport passengers in a commercial vehicle, such as a bus.
3. N - Tank Vehicles: This endorsement is required for drivers who plan to transport liquids or gases in bulk containers.
4. H - Hazardous Materials: This endorsement is required for drivers who plan to transport hazardous materials.
5. X - Combination of Tank Vehicle and Hazardous Materials: This endorsement is required for drivers who plan to transport both hazardous materials and liquids or gases in bulk containers.
It's important to note that each endorsement requires passing a written test and meeting other requirements, such as background checks and additional training.
The most common CDL endorsements include:
1. T - Double/Triple Trailers: This endorsement is required for drivers who plan to operate double or triple trailers.
2. P - Passenger: This endorsement is required for drivers who plan to transport passengers in a commercial vehicle, such as a bus.
3. N - Tank Vehicles: This endorsement is required for drivers who plan to transport liquids or gases in bulk containers.
4. H - Hazardous Materials: This endorsement is required for drivers who plan to transport hazardous materials.
5. X - Combination of Tank Vehicle and Hazardous Materials: This endorsement is required for drivers who plan to transport both hazardous materials and liquids or gases in bulk containers.
It's important to note that each endorsement requires passing a written test and meeting other requirements, such as background checks and additional training.
The Class A CDL (Commercial Driver's License) skills test is a three-part test that evaluates a driver's ability to operate a commercial vehicle safely. The three parts of the test include a pre-trip inspection, basic vehicle control, and on-road driving.
1. Pre-Trip Inspection: The pre-trip inspection evaluates the driver's ability to inspect the vehicle for safety hazards and mechanical issues before operating it. The driver must identify and explain the function of various parts of the vehicle, such as brakes, steering, lights, and tires.
2. Basic Vehicle Control: The basic vehicle control test evaluates the driver's ability to control the vehicle in various situations, such as backing up, turning, and maneuvering in tight spaces. The driver must demonstrate proper techniques for shifting gears, accelerating, braking, and steering.
3. On-Road Driving: The on-road driving test evaluates the driver's ability to safely operate the vehicle in traffic on public roads. The driver must demonstrate proper lane positioning, signaling, speed control, and hazard recognition.
Each part of the skills test is scored separately, and drivers must pass all three parts to obtain a Class A CDL. It's important to note that drivers must also meet other requirements before taking the skills test, such as completing a certified CDL training program and passing a written knowledge test.
1. Pre-Trip Inspection: The pre-trip inspection evaluates the driver's ability to inspect the vehicle for safety hazards and mechanical issues before operating it. The driver must identify and explain the function of various parts of the vehicle, such as brakes, steering, lights, and tires.
2. Basic Vehicle Control: The basic vehicle control test evaluates the driver's ability to control the vehicle in various situations, such as backing up, turning, and maneuvering in tight spaces. The driver must demonstrate proper techniques for shifting gears, accelerating, braking, and steering.
3. On-Road Driving: The on-road driving test evaluates the driver's ability to safely operate the vehicle in traffic on public roads. The driver must demonstrate proper lane positioning, signaling, speed control, and hazard recognition.
Each part of the skills test is scored separately, and drivers must pass all three parts to obtain a Class A CDL. It's important to note that drivers must also meet other requirements before taking the skills test, such as completing a certified CDL training program and passing a written knowledge test.
Yes, there are several restrictions and limitations for drivers with a Class A CDL (Commercial Driver's License). These restrictions are put in place to ensure the safety of the driver and other motorists on the road. Some common restrictions or limitations for Class A CDL holders include:
1. Air Brake Restriction: If a driver did not pass the air brake knowledge and skills tests, they will have an "L" restriction on their license, which prohibits them from operating commercial vehicles equipped with air brakes.
2. Manual Transmission Restriction: If a driver takes the road test in a commercial vehicle with an automatic transmission, they will have an "E" restriction on their license, which prohibits them from operating a commercial vehicle with a manual transmission.
3. Intrastate Only Restriction: If a driver only intends to operate commercial vehicles within the state of Ohio, they may have an "O" restriction on their license.
4. Medical Certification Requirement: All CDL holders, including Class A drivers, are required to undergo a medical examination and maintain a valid medical certificate.
5. Hazmat Endorsement Background Check: If a driver has a hazardous materials endorsement on their CDL, they must undergo a background check every five years to maintain the endorsement.
It's important for drivers to be aware of any restrictions or limitations on their license and comply with all regulations to avoid penalties or fines.
1. Air Brake Restriction: If a driver did not pass the air brake knowledge and skills tests, they will have an "L" restriction on their license, which prohibits them from operating commercial vehicles equipped with air brakes.
2. Manual Transmission Restriction: If a driver takes the road test in a commercial vehicle with an automatic transmission, they will have an "E" restriction on their license, which prohibits them from operating a commercial vehicle with a manual transmission.
3. Intrastate Only Restriction: If a driver only intends to operate commercial vehicles within the state of Ohio, they may have an "O" restriction on their license.
4. Medical Certification Requirement: All CDL holders, including Class A drivers, are required to undergo a medical examination and maintain a valid medical certificate.
5. Hazmat Endorsement Background Check: If a driver has a hazardous materials endorsement on their CDL, they must undergo a background check every five years to maintain the endorsement.
It's important for drivers to be aware of any restrictions or limitations on their license and comply with all regulations to avoid penalties or fines.
No, the Class A CDL written test in Ohio is only available in English. Federal regulations require that all CDL applicants must be able to read and speak English well enough to understand traffic signs, communicate with law enforcement, and respond to official inquiries.
However, Ohio offers a CDL Manual in several languages, including Spanish, French, Russian, and Somali. This manual can help non-English speaking applicants understand the rules and regulations of commercial driving.
If an applicant needs assistance reading and understanding the CDL Manual or has difficulty communicating in English during the written test, they may bring an interpreter with them to the testing location. The interpreter must be fluent in both English and the applicant's preferred language and cannot be a family member or friend of the applicant.
However, Ohio offers a CDL Manual in several languages, including Spanish, French, Russian, and Somali. This manual can help non-English speaking applicants understand the rules and regulations of commercial driving.
If an applicant needs assistance reading and understanding the CDL Manual or has difficulty communicating in English during the written test, they may bring an interpreter with them to the testing location. The interpreter must be fluent in both English and the applicant's preferred language and cannot be a family member or friend of the applicant.
Yes, individuals with disabilities can request accommodations for the Class A CDL written test in Ohio. The Ohio Bureau of Motor Vehicles (BMV) provides reasonable accommodations to ensure that individuals with disabilities have an equal opportunity to take the written test.
To request accommodations, the applicant must complete and submit an Application for Reasonable Accommodations form to the BMV. The form requires information about the applicant's disability, the specific accommodations needed, and any supporting documentation from a qualified medical professional.
Examples of accommodations that may be provided include a separate testing room, extended testing time, or a sign language interpreter. The BMV will review the application and determine which accommodations are reasonable and necessary based on the applicant's disability and needs.
It's important to note that the BMV may require additional documentation or information to support the accommodation request. Applicants should submit their application as early as possible to allow time for processing and review.
To request accommodations, the applicant must complete and submit an Application for Reasonable Accommodations form to the BMV. The form requires information about the applicant's disability, the specific accommodations needed, and any supporting documentation from a qualified medical professional.
Examples of accommodations that may be provided include a separate testing room, extended testing time, or a sign language interpreter. The BMV will review the application and determine which accommodations are reasonable and necessary based on the applicant's disability and needs.
It's important to note that the BMV may require additional documentation or information to support the accommodation request. Applicants should submit their application as early as possible to allow time for processing and review.
Yes, if you fail the Class A CDL written test in Ohio, you can retake it. However, you must wait at least one day before retaking the test.
If you fail the test three times, you must wait at least 30 days before attempting to take it again. Additionally, you will be required to pay a fee each time you take the test.
It's important to note that if you fail the written test, you will not be allowed to take the skills test until you pass the written test. Therefore, it's essential to study and prepare adequately before taking the test.
If you need help studying for the Class A CDL written test, Ohio offers a free CDL practice test on their website, which can help familiarize you with the types of questions that will be on the actual exam. Additionally, there are many commercial study materials available, including books and online courses that can help you prepare for the exam.
If you fail the test three times, you must wait at least 30 days before attempting to take it again. Additionally, you will be required to pay a fee each time you take the test.
It's important to note that if you fail the written test, you will not be allowed to take the skills test until you pass the written test. Therefore, it's essential to study and prepare adequately before taking the test.
If you need help studying for the Class A CDL written test, Ohio offers a free CDL practice test on their website, which can help familiarize you with the types of questions that will be on the actual exam. Additionally, there are many commercial study materials available, including books and online courses that can help you prepare for the exam.
