Instructions

Combination

All applicants who are applying for a Class A CDL should be prepared to take the Combination test. This test covers information found in Section 6 of the Commercial Driver License.. Read More

All applicants who are applying for a Class A CDL should be prepared to take the Combination test. This test covers information found in Section 6 of the Commercial Driver License Manual. Section 6 provides the information needed to safely operate tractor-trailers, doubles, triples, and straight trucks with trailers. The test is made up of 30 multiple-choice questions, and applicants will need to correctly answer a minimum of 24 questions to pass. The Combination test is not a replacement for the Double/Triple endorsement test.

Number of Question 30

Passing Score 25

24. If unsure if a trailer has an Anti-Lock Braking System (ABS), you can:

Look under the trailer for wheel speed sensors coming from the back of the brakes.

Remove a tire and look for the ABS sensor on the axle.

Assume it does have ABS.

If you do not know whether or not a trailer is equipped with ABS, look under the vehicle for the electronic control unit and wheel speed sensor wires coming from the back of the brakes.

25. When backing a trailer, you must turn the steering wheel:

In the direction you want the trailer to move.

In the direction opposite of where you want the trailer to move.

To the left until backing is complete.

When backing a vehicle with a trailer, you must turn the steering wheel in the direction opposite of where you want to go. Once your trailer starts to turn, you should turn the steering wheel the other way to follow the trailer.

26. Driving a combination vehicle ____ than driving a single vehicle.

Is easier

Requires more driving skill

Is better for training

Is safer in inclement weather

Driving a combination vehicle usually requires more skill than driving a single vehicle. Combination vehicles are generally longer and heavier than single commercial vehicles.

27. After coupling, there should be ____ between the upper and lower fifth wheel.

No space

Very little space

A lot of space

Three inches of space

Before a trip, be sure to inspect all couplings. There should be no space between the upper and lower fifth wheel.

28. To prevent a rollover, a driver should:

Keep cargo low.

Place cargo high.

Keep cargo loose.

Turn quickly.

Rollovers can happen when a combination vehicle is turned too quickly. To help prevent the risk of rollover, it is important to keep the vehicle's center of gravity low by loading cargo as close to the ground as possible.

29. Having anti-lock brakes on only one axle:

Will not make a difference in braking.

Will provide increased control in braking.

Will likely cause the air brakes to malfunction.

If a vehicle has anti-lock brakes on just one axle, the driver will still have more control during braking than they would without any anti-lock brakes.

30. When entering or crossing traffic while driving a combination vehicle, it is especially important that you:

Sound your horn.

Make sure there is a large enough gap for your vehicle.

Expect other drivers to make room for your vehicle.

Let other drivers wave you into their lane.

Combination vehicles require more space on the road than other vehicles. When entering or crossing traffic while driving a combination vehicle, it is especially important that there is a large enough gap in traffic for you to safely do so.

Grade This Section