Bus
This endorsement is required for driving a school bus. To receive this endorsement, applicants must pass a test. The test consists of 20 multiple choice questions. To pass, the applicant must answer at least 16 questions correctly. Each question has three or four possible answer choices. Test questions come from the Wisconsin Commercial Driver’s Manual. Questions come from chapter covering School Buses. The School Bus endorsement can be used with the Class A, B or C CDL.
Number of Question
Passing Score
8. Before evacuating a bus in response to a hazard, a driver should:
Explanation
If time permits, before deciding to evacuate a school bus, the driver should contact their dispatcher to explain the situation. The decision to evacuate must be a timely one.
9. After students unload at a school, the driver:
Explanation
After students have exited a bus at a school, the driver should walk through the bus to check for any remaining students who are hiding or sleeping. Drivers should also look out for items that students may have left behind.
10. ABS allows you to:
Explanation
Anti-Lock Braking Systems (ABS) help prevent brake lockup when driving on slippery surfaces. If a driver brakes too hard on a slippery surface, ABS makes it easier for the driver to maintain control of their vehicle. A vehicle equipped with ABS should be driven and braked in the same way as a vehicle without ABS.
11. Before leaving a bus stop, a driver should:
Explanation
Before pulling away from a bus stop, a driver should make sure that there are no students running to catch the bus.
12. School buses:
Explanation
In general, school buses manufactured after 1998 or 1999 must be equipped with an Anti-Lock Braking System (ABS). Many older buses are equipped with ABS as well.
13. The overhead inside rearview mirror should be positioned to show:
Explanation
The top portion of the overhead inside rearview mirror should be positioned to display the top of the bus's rear window. This mirror positioning should allow the driver to see all of the students on the bus, including the heads of the students sitting immediately behind the driver.
14. When dropping off students at a school, a driver should:
Explanation
When unloading students at a school, a bus driver must secure the bus by turning off the engine. If they must leave the driver's compartment, they should remove the key from the ignition. The driver must supervise the unloading process.
Search the best driving school in your neighbourhood
Frequently Asked Questions
To obtain a CDL Bus endorsement in Wisconsin, you need to follow these steps:
1. Obtain a Wisconsin Commercial Driver's License (CDL): You must have a valid Wisconsin CDL before you can apply for a CDL Bus endorsement. To get a CDL, you need to pass a knowledge test, skills test, and a medical examination.
2. Meet the Requirements: You must be at least 21 years old to drive interstate and have a clean driving record. You also need to pass a vision test and meet the medical requirements for operating a commercial vehicle.
3. Study for the CDL Bus Endorsement Test: You need to study the Wisconsin Commercial Driver's Manual and learn about the specific rules and regulations for driving buses.
4. Schedule and Pass the CDL Bus Endorsement Test: Once you feel confident in your knowledge, you can schedule an appointment with your local DMV office to take the CDL Bus endorsement test. The test will consist of both a written knowledge test and a skills test.
5. Submit Application and Pay Fees: After passing the CDL Bus Endorsement Test, you will need to submit an application to add the endorsement to your CDL. You will also need to pay the required fees.
6. Receive Your CDL with Bus Endorsement: Once your application is processed and approved, you will receive your Wisconsin CDL with the Bus endorsement added.
It is important to note that driving a bus requires additional training and experience beyond just obtaining the CDL Bus endorsement. It is recommended that you seek out additional training and practice before operating a bus on public roadways.
1. Obtain a Wisconsin Commercial Driver's License (CDL): You must have a valid Wisconsin CDL before you can apply for a CDL Bus endorsement. To get a CDL, you need to pass a knowledge test, skills test, and a medical examination.
2. Meet the Requirements: You must be at least 21 years old to drive interstate and have a clean driving record. You also need to pass a vision test and meet the medical requirements for operating a commercial vehicle.
3. Study for the CDL Bus Endorsement Test: You need to study the Wisconsin Commercial Driver's Manual and learn about the specific rules and regulations for driving buses.
4. Schedule and Pass the CDL Bus Endorsement Test: Once you feel confident in your knowledge, you can schedule an appointment with your local DMV office to take the CDL Bus endorsement test. The test will consist of both a written knowledge test and a skills test.
5. Submit Application and Pay Fees: After passing the CDL Bus Endorsement Test, you will need to submit an application to add the endorsement to your CDL. You will also need to pay the required fees.
6. Receive Your CDL with Bus Endorsement: Once your application is processed and approved, you will receive your Wisconsin CDL with the Bus endorsement added.
It is important to note that driving a bus requires additional training and experience beyond just obtaining the CDL Bus endorsement. It is recommended that you seek out additional training and practice before operating a bus on public roadways.
To obtain a CDL Bus license in Wisconsin, you need to meet the following requirements:
1. Age: You must be at least 18 years old to drive a commercial vehicle within the state of Wisconsin, and at least 21 years old to drive a commercial vehicle across state lines.
2. Valid Driver's License: You must have a valid regular driver's license issued by the state of Wisconsin.
3. Medical Requirements: You must meet the physical and medical requirements set by the Federal Motor Carrier Safety Administration (FMCSA) to operate a commercial motor vehicle.
4. Commercial Learner's Permit (CLP): You must hold a valid CLP for at least 14 days before taking the CDL skills test.
5. Knowledge Tests: You must pass a series of knowledge tests that covers general knowledge, air brakes, combination vehicles, and passenger transport.
6. Skills Tests: You must pass a skills test that includes a pre-trip inspection, basic vehicle control, and on-road driving test.
7. Background Check: You must pass a background check that includes a criminal history and driving record check.
8. Endorsements: If you plan to drive specific types of buses, such as school buses or buses carrying hazardous materials, you may need to obtain additional endorsements.
It is important to note that obtaining a CDL Bus license requires additional training beyond just passing the knowledge and skills tests. It is recommended that you seek out additional training and practice before operating a bus on public roadways.
1. Age: You must be at least 18 years old to drive a commercial vehicle within the state of Wisconsin, and at least 21 years old to drive a commercial vehicle across state lines.
2. Valid Driver's License: You must have a valid regular driver's license issued by the state of Wisconsin.
3. Medical Requirements: You must meet the physical and medical requirements set by the Federal Motor Carrier Safety Administration (FMCSA) to operate a commercial motor vehicle.
4. Commercial Learner's Permit (CLP): You must hold a valid CLP for at least 14 days before taking the CDL skills test.
5. Knowledge Tests: You must pass a series of knowledge tests that covers general knowledge, air brakes, combination vehicles, and passenger transport.
6. Skills Tests: You must pass a skills test that includes a pre-trip inspection, basic vehicle control, and on-road driving test.
7. Background Check: You must pass a background check that includes a criminal history and driving record check.
8. Endorsements: If you plan to drive specific types of buses, such as school buses or buses carrying hazardous materials, you may need to obtain additional endorsements.
It is important to note that obtaining a CDL Bus license requires additional training beyond just passing the knowledge and skills tests. It is recommended that you seek out additional training and practice before operating a bus on public roadways.
Yes, you do need specific experience and training to obtain a CDL Bus endorsement in Wisconsin. The Federal Motor Carrier Safety Administration (FMCSA) requires that you have specific training and experience to operate a commercial vehicle that carries passengers.
Here are some training and experience requirements for obtaining a CDL Bus endorsement:
1. Complete a CDL Training Program: You should complete a commercial driver's license training program that includes classroom instruction, behind-the-wheel training, and observation time.
2. Obtain a Commercial Learner's Permit (CLP): You must hold a valid CLP for at least 14 days before taking the CDL skills test.
3. Pass the CDL Skills Test: You must pass a skills test that includes a pre-trip inspection, basic vehicle control, and on-road driving test in a passenger-carrying vehicle.
4. Obtain Passenger and School Bus Endorsements: Depending on the type of bus you plan to operate, you may need to obtain additional endorsements. For example, if you plan to drive a school bus, you will need to obtain a School Bus Endorsement (S) in addition to the Passenger (P) endorsement.
5. Complete Additional Training: To ensure the safety of passengers, most employers will require additional training beyond obtaining a CDL Bus endorsement. This may include completing an employer-specific training program or attending additional safety courses.
It is important to note that driving a bus requires additional training and experience beyond just obtaining the CDL Bus endorsement. It is recommended that you seek out additional training and practice before operating a bus on public roadways.
Here are some training and experience requirements for obtaining a CDL Bus endorsement:
1. Complete a CDL Training Program: You should complete a commercial driver's license training program that includes classroom instruction, behind-the-wheel training, and observation time.
2. Obtain a Commercial Learner's Permit (CLP): You must hold a valid CLP for at least 14 days before taking the CDL skills test.
3. Pass the CDL Skills Test: You must pass a skills test that includes a pre-trip inspection, basic vehicle control, and on-road driving test in a passenger-carrying vehicle.
4. Obtain Passenger and School Bus Endorsements: Depending on the type of bus you plan to operate, you may need to obtain additional endorsements. For example, if you plan to drive a school bus, you will need to obtain a School Bus Endorsement (S) in addition to the Passenger (P) endorsement.
5. Complete Additional Training: To ensure the safety of passengers, most employers will require additional training beyond obtaining a CDL Bus endorsement. This may include completing an employer-specific training program or attending additional safety courses.
It is important to note that driving a bus requires additional training and experience beyond just obtaining the CDL Bus endorsement. It is recommended that you seek out additional training and practice before operating a bus on public roadways.
Yes, there are different classes or types of CDL Bus licenses in Wisconsin. The specific type of CDL Bus license you need will depend on the type of bus you plan to drive and the number of passengers you plan to transport.
Here are the different classes of CDL Bus licenses:
1. Class B CDL: This license allows you to drive a single vehicle with a GVWR of 26,001 pounds or more, or a combination of vehicles with a GCWR of 26,001 pounds or more. This class is typically required for driving smaller buses such as minibuses.
2. Class A CDL: This license allows you to drive a combination of vehicles with a GCWR of 26,001 pounds or more, where the vehicle being towed weighs more than 10,000 pounds. This class is typically required for driving larger buses such as motorcoaches.
In addition to the different classes of CDL Bus licenses, there are also different endorsements that you may need depending on the type of bus you plan to drive. The most common endorsements include:
1. P - Passenger Endorsement: This endorsement is required for all drivers who operate vehicles designed to carry 16 or more passengers, including the driver.
2. S - School Bus Endorsement: This endorsement is required for all drivers who operate school buses that carry passengers to and from school-related events.
3. H - Hazardous Materials Endorsement: This endorsement is required for all drivers who transport hazardous materials in amounts requiring placards.
It is important to note that there may be additional requirements and regulations specific to each type of CDL Bus license and endorsement.
Here are the different classes of CDL Bus licenses:
1. Class B CDL: This license allows you to drive a single vehicle with a GVWR of 26,001 pounds or more, or a combination of vehicles with a GCWR of 26,001 pounds or more. This class is typically required for driving smaller buses such as minibuses.
2. Class A CDL: This license allows you to drive a combination of vehicles with a GCWR of 26,001 pounds or more, where the vehicle being towed weighs more than 10,000 pounds. This class is typically required for driving larger buses such as motorcoaches.
In addition to the different classes of CDL Bus licenses, there are also different endorsements that you may need depending on the type of bus you plan to drive. The most common endorsements include:
1. P - Passenger Endorsement: This endorsement is required for all drivers who operate vehicles designed to carry 16 or more passengers, including the driver.
2. S - School Bus Endorsement: This endorsement is required for all drivers who operate school buses that carry passengers to and from school-related events.
3. H - Hazardous Materials Endorsement: This endorsement is required for all drivers who transport hazardous materials in amounts requiring placards.
It is important to note that there may be additional requirements and regulations specific to each type of CDL Bus license and endorsement.
No, you cannot use your personal vehicle for the CDL Bus driving test in Wisconsin. You must use a vehicle that meets the specific requirements for the type of CDL Bus license you are pursuing.
For the CDL Bus driving test, you must bring a vehicle that meets the following requirements:
1. The vehicle must be representative of the type of bus you plan to drive.
2. The vehicle must be properly registered, insured, and in good working condition.
3. The vehicle must be equipped with a valid safety inspection sticker.
4. The vehicle must have a seating capacity of at least 16 passengers, including the driver.
5. The vehicle must be equipped with dual rear wheels and air brakes, if applicable.
6. The vehicle must have a valid registration and license plate sticker.
7. The vehicle must have a current insurance card.
If you do not own or have access to a suitable bus for the driving test, you may be able to rent one from a commercial driving school or other designated provider. It is important to confirm that any rental vehicle meets all of the requirements listed above before scheduling your driving test.
For the CDL Bus driving test, you must bring a vehicle that meets the following requirements:
1. The vehicle must be representative of the type of bus you plan to drive.
2. The vehicle must be properly registered, insured, and in good working condition.
3. The vehicle must be equipped with a valid safety inspection sticker.
4. The vehicle must have a seating capacity of at least 16 passengers, including the driver.
5. The vehicle must be equipped with dual rear wheels and air brakes, if applicable.
6. The vehicle must have a valid registration and license plate sticker.
7. The vehicle must have a current insurance card.
If you do not own or have access to a suitable bus for the driving test, you may be able to rent one from a commercial driving school or other designated provider. It is important to confirm that any rental vehicle meets all of the requirements listed above before scheduling your driving test.
Yes, during the CDL Bus driving test in Wisconsin, you will be required to demonstrate specific skills and maneuvers with the vehicle. The test will consist of three parts: the pre-trip inspection, basic vehicle control skills test, and the on-road driving test.
Here are some of the specific skills and maneuvers you will need to demonstrate:
1. Pre-trip Inspection: Before beginning the driving portion of the test, you must perform a thorough pre-trip inspection of your vehicle. You will be required to identify and explain the proper inspection procedures for various parts of the bus, including the engine compartment, brakes, steering mechanism, and emergency equipment.
2. Basic Vehicle Control Skills Test: During this portion of the test, you will be required to demonstrate your ability to control the vehicle in a variety of situations. This includes backing up in a straight line for 50 feet, parallel parking, and completing a right-hand turn within a defined area.
3. On-road Driving Test: During this portion of the test, you will be required to demonstrate your ability to safely operate the vehicle on public roads. You will be evaluated on your ability to perform a variety of tasks such as signaling turns, changing lanes, merging onto highways, and navigating intersections with traffic lights.
It is important to note that each specific type of CDL Bus license may have additional requirements or maneuvers that you will need to demonstrate during the driving test. It is recommended that you review the Wisconsin Commercial Driver's Manual and practice with a qualified instructor or driving school before taking the CDL Bus driving test.
Here are some of the specific skills and maneuvers you will need to demonstrate:
1. Pre-trip Inspection: Before beginning the driving portion of the test, you must perform a thorough pre-trip inspection of your vehicle. You will be required to identify and explain the proper inspection procedures for various parts of the bus, including the engine compartment, brakes, steering mechanism, and emergency equipment.
2. Basic Vehicle Control Skills Test: During this portion of the test, you will be required to demonstrate your ability to control the vehicle in a variety of situations. This includes backing up in a straight line for 50 feet, parallel parking, and completing a right-hand turn within a defined area.
3. On-road Driving Test: During this portion of the test, you will be required to demonstrate your ability to safely operate the vehicle on public roads. You will be evaluated on your ability to perform a variety of tasks such as signaling turns, changing lanes, merging onto highways, and navigating intersections with traffic lights.
It is important to note that each specific type of CDL Bus license may have additional requirements or maneuvers that you will need to demonstrate during the driving test. It is recommended that you review the Wisconsin Commercial Driver's Manual and practice with a qualified instructor or driving school before taking the CDL Bus driving test.
Yes, there are additional medical and physical requirements for a CDL Bus endorsement in Wisconsin. These requirements are intended to ensure that drivers are physically and mentally capable of safely operating a commercial bus.
To obtain a CDL Bus endorsement in Wisconsin, you must meet the following medical and physical requirements:
1. Vision: You must have at least 20/40 vision in each eye with or without corrective lenses, and a horizontal field of vision of at least 70 degrees in each eye.
2. Hearing: You must be able to hear a forced whisper at a distance of at least 5 feet, or be able to pass an audiometric test.
3. Blood Pressure: Your blood pressure must be below 160/100. If your blood pressure is between 140/90 and 159/99, you may qualify for a temporary medical certificate while you work to lower your blood pressure.
4. Diabetes: If you have diabetes, you must provide the state with a diabetes exemption waiver from the Federal Motor Carrier Safety Administration (FMCSA).
5. Other Medical Conditions: Certain medical conditions may disqualify you from obtaining a CDL Bus endorsement, such as epilepsy, severe sleep apnea, or a history of alcohol or drug abuse.
In addition to meeting these medical and physical requirements, you must also pass a drug and alcohol test before obtaining your CDL Bus endorsement in Wisconsin.
To obtain a CDL Bus endorsement in Wisconsin, you must meet the following medical and physical requirements:
1. Vision: You must have at least 20/40 vision in each eye with or without corrective lenses, and a horizontal field of vision of at least 70 degrees in each eye.
2. Hearing: You must be able to hear a forced whisper at a distance of at least 5 feet, or be able to pass an audiometric test.
3. Blood Pressure: Your blood pressure must be below 160/100. If your blood pressure is between 140/90 and 159/99, you may qualify for a temporary medical certificate while you work to lower your blood pressure.
4. Diabetes: If you have diabetes, you must provide the state with a diabetes exemption waiver from the Federal Motor Carrier Safety Administration (FMCSA).
5. Other Medical Conditions: Certain medical conditions may disqualify you from obtaining a CDL Bus endorsement, such as epilepsy, severe sleep apnea, or a history of alcohol or drug abuse.
In addition to meeting these medical and physical requirements, you must also pass a drug and alcohol test before obtaining your CDL Bus endorsement in Wisconsin.
No, you cannot legally transport passengers for hire without a CDL Bus endorsement. In Wisconsin, a CDL (Commercial Driver's License) is required to operate any vehicle that:
- Weighs 26,001 pounds or more
- Is designed to transport 16 or more passengers (including the driver)
- Is carrying hazardous materials in certain quantities
A CDL Bus endorsement is required to operate any vehicle that is designed to transport 16 or more passengers (including the driver).
If you are caught operating a bus without a CDL Bus endorsement, you may face fines and other penalties. In addition, if you are involved in an accident while operating a bus without the proper endorsement, your insurance may not cover the damages.
It is important to note that obtaining a CDL Bus endorsement requires passing a written knowledge test and a driving skills test. You must also meet certain medical and physical requirements. It is recommended that you review the Wisconsin Commercial Driver's Manual and practice with a qualified instructor or driving school before taking the CDL Bus driving test.
- Weighs 26,001 pounds or more
- Is designed to transport 16 or more passengers (including the driver)
- Is carrying hazardous materials in certain quantities
A CDL Bus endorsement is required to operate any vehicle that is designed to transport 16 or more passengers (including the driver).
If you are caught operating a bus without a CDL Bus endorsement, you may face fines and other penalties. In addition, if you are involved in an accident while operating a bus without the proper endorsement, your insurance may not cover the damages.
It is important to note that obtaining a CDL Bus endorsement requires passing a written knowledge test and a driving skills test. You must also meet certain medical and physical requirements. It is recommended that you review the Wisconsin Commercial Driver's Manual and practice with a qualified instructor or driving school before taking the CDL Bus driving test.
You can add the CDL Bus endorsement to your existing CDL license in Wisconsin. To do so, you will need to pass the written knowledge test for the CDL Bus endorsement and provide proof of meeting the medical and physical requirements.
To add the CDL Bus endorsement to your license, you can visit a Wisconsin DMV Service Center that offers CDL testing and apply for the endorsement. You will need to bring your current CDL license, proof of identity, and proof of meeting the medical and physical requirements.
If you do not currently have a CDL license, you will need to apply for a new license that includes the CDL Bus endorsement. This will require passing all necessary written and driving tests, as well as meeting the medical and physical requirements.
It is important to note that adding a CDL Bus endorsement may also require additional fees and may affect your insurance rates. Be sure to check with your insurance provider before adding any endorsements to your license.
To add the CDL Bus endorsement to your license, you can visit a Wisconsin DMV Service Center that offers CDL testing and apply for the endorsement. You will need to bring your current CDL license, proof of identity, and proof of meeting the medical and physical requirements.
If you do not currently have a CDL license, you will need to apply for a new license that includes the CDL Bus endorsement. This will require passing all necessary written and driving tests, as well as meeting the medical and physical requirements.
It is important to note that adding a CDL Bus endorsement may also require additional fees and may affect your insurance rates. Be sure to check with your insurance provider before adding any endorsements to your license.
Yes, there are some restrictions and limitations for drivers with a CDL Bus endorsement in Wisconsin. Here are some of the most important ones:
1. Passenger limit: Drivers with a CDL Bus endorsement are limited to transporting 16 or more passengers, including the driver. If you want to transport fewer passengers, you can still use your CDL, but you will not need the Bus endorsement.
2. School bus endorsement: If you want to transport school children, you will need a School Bus endorsement in addition to your CDL Bus endorsement. This requires passing additional written and driving tests.
3. Medical requirements: Drivers with a CDL Bus endorsement must meet certain medical requirements, including passing a physical examination every two years.
4. Alcohol and drug testing: CDL Bus drivers are subject to alcohol and drug testing before employment, after accidents, and at random intervals.
5. Hours of service regulations: Drivers with a CDL Bus endorsement must comply with federal hours of service regulations, which limit the number of hours they can drive each day and each week.
6. Endorsement renewals: The CDL Bus endorsement must be renewed every four years along with your regular CDL license.
It's important to keep in mind that violating any of these restrictions or limitations can result in penalties such as fines or license suspension.
1. Passenger limit: Drivers with a CDL Bus endorsement are limited to transporting 16 or more passengers, including the driver. If you want to transport fewer passengers, you can still use your CDL, but you will not need the Bus endorsement.
2. School bus endorsement: If you want to transport school children, you will need a School Bus endorsement in addition to your CDL Bus endorsement. This requires passing additional written and driving tests.
3. Medical requirements: Drivers with a CDL Bus endorsement must meet certain medical requirements, including passing a physical examination every two years.
4. Alcohol and drug testing: CDL Bus drivers are subject to alcohol and drug testing before employment, after accidents, and at random intervals.
5. Hours of service regulations: Drivers with a CDL Bus endorsement must comply with federal hours of service regulations, which limit the number of hours they can drive each day and each week.
6. Endorsement renewals: The CDL Bus endorsement must be renewed every four years along with your regular CDL license.
It's important to keep in mind that violating any of these restrictions or limitations can result in penalties such as fines or license suspension.
