Knowledge Test Class B
This license is required for driving a single vehicle with a GVWR of more than 26,001 pounds, and a trailer not to exceed 10,000 pounds gross vehicle weight rating, or a vehicle designed to transport 24 or more people (including the driver). To receive this license, applicants must pass a 50-question test. To pass, applicants must answer 40 questions correctly. Each question has three or four possible answer choices. Test questions come from the Wyoming Driver License Manual for Commercial and Heavy Vehicles. Questions come from chapters covering: Introduction, Driving Safely, Transporting Cargo Safely, Air Brakes (if applicable), Pre-Trip Vehicle Inspection Test, Basic Vehicle Control Skills Test and On-Road Driving.. Endorsements that may be used with a Class B CDL are: Hazardous materials, Tank, Passenger, HazMat and Tank, Air Brakes and School bus.
8. Rims with welding repairs:
A driver should inspect wheels before a drive, specifically looking for damage on the wheels and rims. Wheels or rims that have had welding repairs are not safe for use.
9. If you are turning left at an intersection where there are two available turn lanes:
You may have to swing right to safely make a left turn. If there are two left turn lanes available at an intersection, you should always begin your turn in the rightmost lane.
10. Dry bulk tanks:
Dry bulk tanks require special care to be driven, both because they have high centers of gravity and because the weight of the load can shift in transit.
11. When driving a vehicle, rough acceleration is:
When accelerating, speed up smoothly and gradually so your vehicle does not jerk. Rough acceleration can cause mechanical damage.
12. The faster you drive:
The faster you are driving, the longer your stopping distance will become. Brake accordingly.
13. When coming to a stop, you should apply the brake pedal by:
When stopping, you should push the brake pedal down gradually. Braking gradually will help you to maintain proper control of your vehicle.
14. You must have an air brake endorsement:
You must take an air brakes knowledge test to become licensed to operate a vehicle that is equipped with air brakes, including an air over hydraulic braking system.
Frequently Asked Questions
1. Obtain a Wyoming commercial learner's permit (CLP) by passing the written knowledge test for the Class B CDL.
2. Hold the CLP for at least 14 days before taking the skills test.
3. Schedule and pass the skills test, which includes a pre-trip vehicle inspection, basic vehicle control, and on-road driving.
4. Provide a valid medical examiner's certificate.
5. Pay the appropriate fees and submit an application for commercial driver's license.
6. Once issued, always carry your Class B CDL when operating a commercial vehicle.
It's important to note that there are additional endorsements that may be required to operate certain types of vehicles, such as hazardous materials or passenger transport.
1. Straight trucks: This includes delivery trucks, dump trucks, and other similar vehicles.
2. Buses: You can operate buses designed to transport more than 15 passengers, including school buses.
3. Tractor-trailers: You can operate tractor-trailers that have a trailer with a maximum weight of 10,000 pounds.
It's important to note that there may be additional endorsements required to operate certain types of vehicles, such as tankers or hazardous materials. Make sure to check with the Wyoming Department of Transportation for specific requirements and restrictions.
1. Be at least 18 years of age to operate within the state of Wyoming or 21 years old for interstate commerce.
2. Hold a valid Wyoming driver's license.
3. Pass a vision test.
4. Obtain a commercial learner's permit (CLP) by passing a written knowledge test for the Class B CDL.
5. Hold the CLP for at least 14 days before taking the skills test.
6. Schedule and pass the skills test, which includes a pre-trip vehicle inspection, basic vehicle control, and on-road driving.
7. Provide a valid medical examiner's certificate.
8. Pay the appropriate fees and submit an application for commercial driver's license.
It's important to note that there may be additional requirements for specific endorsements, such as hazardous materials or passenger transport. Make sure to check with the Wyoming Department of Transportation for specific requirements and restrictions.
It's important to note that there may be additional age requirements for specific types of vehicles or endorsements, such as hazardous materials or passenger transport. Make sure to check with the Wyoming Department of Transportation for specific requirements and restrictions.
In general, the following endorsements are available for Class B CDL drivers in Wyoming:
1. Passenger (P) endorsement: required for drivers who will be operating a vehicle designed to transport 16 or more passengers, including the driver.
2. School Bus (S) endorsement: required for drivers who will be operating a school bus.
3. Tank (N) endorsement: required for drivers who will be transporting liquids or gases in bulk containers with a capacity of 1,000 gallons or more.
4. Hazardous Materials (H) endorsement: required for drivers who will be transporting hazardous materials that require placarding.
It's important to note that additional endorsements may be required for specific types of vehicles or cargo. Make sure to check with the Wyoming Department of Transportation for specific requirements and restrictions.
1. Pre-trip Inspection: You will be required to perform a thorough inspection of your vehicle, including all safety equipment, brakes, tires, lights, and other components. You must identify any defects or problems and explain how you would correct them.
2. Basic Vehicle Control: You will be asked to demonstrate your ability to control the vehicle in various situations. This includes straight-line backing, offset backing, parallel parking, and docking.
3. On-road Driving: You will be required to demonstrate your ability to safely operate the vehicle on public roads. This includes merging onto highways, changing lanes, turning at intersections, and making emergency stops.
During the test, you will be evaluated on a variety of skills including speed control, steering control, shifting gears, signaling, and communication with other drivers. It's important to practice these skills extensively before taking the skills test.
Once you pass the skills test and other required tests (such as the written knowledge test), you will be issued a Class B CDL license which will allow you to legally operate commercial vehicles that fall under this classification in Wyoming.
1. Vehicle Weight: Drivers with a Class B CDL license are allowed to operate single vehicles with a weight rating of 26,001 pounds or more, or a combination of vehicles with a total weight rating of less than 26,001 pounds. This means that they cannot operate vehicles that exceed this weight limit.
2. Passenger Limit: Drivers with a Class B CDL license are allowed to transport up to 16 passengers (including the driver) if they have obtained the Passenger (P) endorsement on their license.
3. Cargo Limit: Drivers with a Class B CDL license are allowed to transport any type of non-hazardous material and any quantity of hazardous materials that do not require placards if they have not obtained the Hazardous Materials (H) endorsement on their license.
4. Geographic Limitation: Some states may require additional endorsements or permits for drivers with a Class B CDL license who will be operating in their state.
It's important to note that these restrictions and limitations may vary depending on the state and specific circumstances. Make sure to check with the Wyoming Department of Transportation for specific requirements and restrictions related to your Class B CDL license.
However, if you have difficulty understanding English, you may bring an interpreter with you to help translate the test questions and instructions. The interpreter must be at least 18 years old and cannot be a family member or friend. Additionally, the interpreter must sign a statement affirming that they will accurately translate the exam questions and that they will not provide any assistance beyond translation.
It's important to note that the interpreter is not allowed to assist you with answering the questions or provide any other kind of assistance beyond translation. You are solely responsible for understanding and answering the questions on your own.
If you have a disability that may affect your ability to take the test, you can request accommodations such as extra time, a separate testing room, or assistive technology. You will need to submit a written request for accommodations along with documentation of your disability and the specific accommodations you are requesting.
WYDOT will review your request and may require additional information or documentation to support your request. Once your request is approved, you will be notified of the accommodations that will be provided.
It's important to note that requests for accommodations must be made in advance, as it may take time for WYDOT to review and approve your request. Additionally, accommodations may not be granted if they fundamentally alter the nature of the test or give you an unfair advantage over other test-takers.
If you fail the written test, you will be allowed to retake it on a future date. You will need to pay the testing fee again and schedule a new appointment to take the test. You cannot retake the test on the same day.
In Wyoming, there is no limit to the number of times you can retake the written test. However, there is a waiting period of at least one day between attempts. This means that if you fail the test, you must wait at least one day before scheduling your next attempt.
It's important to note that there may be additional waiting periods or requirements if you fail the written test multiple times. For example, if you fail the test three times, you may be required to complete additional training or take a refresher course before being allowed to retake the test again.