Knowledge Test Class B
This license is required for driving a single vehicle with a GVWR of more than 26,001 pounds, and a trailer not to exceed 10,000 pounds gross vehicle weight rating, or a vehicle designed to transport 24 or more people (including the driver). To receive this license, applicants must pass a 50-question test. To pass, applicants must answer 40 questions correctly. Each question has three or four possible answer choices. Test questions come from the Wyoming Driver License Manual for Commercial and Heavy Vehicles. Questions come from chapters covering: Introduction, Driving Safely, Transporting Cargo Safely, Air Brakes (if applicable), Pre-Trip Vehicle Inspection Test, Basic Vehicle Control Skills Test and On-Road Driving.. Endorsements that may be used with a Class B CDL are: Hazardous materials, Tank, Passenger, HazMat and Tank, Air Brakes and School bus.
Number of Question
Passing Score
43. In a vehicle with dual parking control valves, a separate air tank can be used:
Explanation
In a vehicle with dual parking control valves, there is a separate air tank that can be used to temporarily release the spring brakes if they have been activated due to low air pressure. Pushing in the proper control will release the spring brakes for a short period of time, allowing the driver to move the vehicle in an emergency.
44. When checking your tires as part of the pre-trip inspection, you should look at the:
Explanation
When checking your tires as part of a pre-trip inspection, it is important to verify that the tire pressure is neither too low nor too high.
45. A tank endorsement is:
Explanation
With some exceptions, you must have a tank endorsement to transport liquids or gases. This applies to both hazardous and non-hazardous substances.
46. When making a tight maneuver, you should:
Explanation
Make a point of checking your mirrors often when making tight maneuvers.
47. What should happen if the air pressure in the air brake system tanks falls below 60 psi?
Explanation
On vehicles with air brakes, a low air pressure warning signal will come on if the pressure in the air tanks falls below 60 psi. On large buses, the signal may activate at 80 to 85 psi.
48. If involved in an accident, which of the following is not recommended?
Explanation
When involved in an accident, you should protect the area, notify authorities, care for the injured, collect required information, and report the accident. You can lose your license for leaving the scene of an accident.
49. Blocking is used to:
Explanation
Blocking and bracing are used to prevent cargo from sliding in transit.
50. When conducting a pre-drive inspection:
Explanation
The first step of a vehicle inspection is to review the last vehicle inspection report. Only sign the report if noted defects are certified to have been repaired.
Frequently Asked Questions
A Class B CDL (Commercial Driver's License) in Wyoming allows a driver to operate a single vehicle with a weight of 26,001 pounds or more, or a combination of vehicles with a total weight of less than 26,001 pounds. Here are the step-by-step requirements to obtain a Class B CDL in Wyoming:
1. Obtain a Wyoming commercial learner's permit (CLP) by passing the written knowledge test for the Class B CDL.
2. Hold the CLP for at least 14 days before taking the skills test.
3. Schedule and pass the skills test, which includes a pre-trip vehicle inspection, basic vehicle control, and on-road driving.
4. Provide a valid medical examiner's certificate.
5. Pay the appropriate fees and submit an application for commercial driver's license.
6. Once issued, always carry your Class B CDL when operating a commercial vehicle.
It's important to note that there are additional endorsements that may be required to operate certain types of vehicles, such as hazardous materials or passenger transport.
1. Obtain a Wyoming commercial learner's permit (CLP) by passing the written knowledge test for the Class B CDL.
2. Hold the CLP for at least 14 days before taking the skills test.
3. Schedule and pass the skills test, which includes a pre-trip vehicle inspection, basic vehicle control, and on-road driving.
4. Provide a valid medical examiner's certificate.
5. Pay the appropriate fees and submit an application for commercial driver's license.
6. Once issued, always carry your Class B CDL when operating a commercial vehicle.
It's important to note that there are additional endorsements that may be required to operate certain types of vehicles, such as hazardous materials or passenger transport.
With a Class B CDL license in Wyoming, you can operate a single vehicle with a weight of 26,001 pounds or more or a combination of vehicles with a total weight of less than 26,001 pounds. This includes vehicles such as:
1. Straight trucks: This includes delivery trucks, dump trucks, and other similar vehicles.
2. Buses: You can operate buses designed to transport more than 15 passengers, including school buses.
3. Tractor-trailers: You can operate tractor-trailers that have a trailer with a maximum weight of 10,000 pounds.
It's important to note that there may be additional endorsements required to operate certain types of vehicles, such as tankers or hazardous materials. Make sure to check with the Wyoming Department of Transportation for specific requirements and restrictions.
1. Straight trucks: This includes delivery trucks, dump trucks, and other similar vehicles.
2. Buses: You can operate buses designed to transport more than 15 passengers, including school buses.
3. Tractor-trailers: You can operate tractor-trailers that have a trailer with a maximum weight of 10,000 pounds.
It's important to note that there may be additional endorsements required to operate certain types of vehicles, such as tankers or hazardous materials. Make sure to check with the Wyoming Department of Transportation for specific requirements and restrictions.
To obtain a Class B CDL (Commercial Driver's License) in Wyoming, you must meet the following requirements:
1. Be at least 18 years of age to operate within the state of Wyoming or 21 years old for interstate commerce.
2. Hold a valid Wyoming driver's license.
3. Pass a vision test.
4. Obtain a commercial learner's permit (CLP) by passing a written knowledge test for the Class B CDL.
5. Hold the CLP for at least 14 days before taking the skills test.
6. Schedule and pass the skills test, which includes a pre-trip vehicle inspection, basic vehicle control, and on-road driving.
7. Provide a valid medical examiner's certificate.
8. Pay the appropriate fees and submit an application for commercial driver's license.
It's important to note that there may be additional requirements for specific endorsements, such as hazardous materials or passenger transport. Make sure to check with the Wyoming Department of Transportation for specific requirements and restrictions.
1. Be at least 18 years of age to operate within the state of Wyoming or 21 years old for interstate commerce.
2. Hold a valid Wyoming driver's license.
3. Pass a vision test.
4. Obtain a commercial learner's permit (CLP) by passing a written knowledge test for the Class B CDL.
5. Hold the CLP for at least 14 days before taking the skills test.
6. Schedule and pass the skills test, which includes a pre-trip vehicle inspection, basic vehicle control, and on-road driving.
7. Provide a valid medical examiner's certificate.
8. Pay the appropriate fees and submit an application for commercial driver's license.
It's important to note that there may be additional requirements for specific endorsements, such as hazardous materials or passenger transport. Make sure to check with the Wyoming Department of Transportation for specific requirements and restrictions.
The minimum age requirement for a Class B CDL (Commercial Driver's License) license in Wyoming is 18 years old to operate within the state of Wyoming. However, to operate in interstate commerce, you must be at least 21 years old.
It's important to note that there may be additional age requirements for specific types of vehicles or endorsements, such as hazardous materials or passenger transport. Make sure to check with the Wyoming Department of Transportation for specific requirements and restrictions.
It's important to note that there may be additional age requirements for specific types of vehicles or endorsements, such as hazardous materials or passenger transport. Make sure to check with the Wyoming Department of Transportation for specific requirements and restrictions.
Whether you need any endorsements for a Class B CDL (Commercial Driver's License) license depends on the type of vehicle you plan to operate and the cargo you plan to transport.
In general, the following endorsements are available for Class B CDL drivers in Wyoming:
1. Passenger (P) endorsement: required for drivers who will be operating a vehicle designed to transport 16 or more passengers, including the driver.
2. School Bus (S) endorsement: required for drivers who will be operating a school bus.
3. Tank (N) endorsement: required for drivers who will be transporting liquids or gases in bulk containers with a capacity of 1,000 gallons or more.
4. Hazardous Materials (H) endorsement: required for drivers who will be transporting hazardous materials that require placarding.
It's important to note that additional endorsements may be required for specific types of vehicles or cargo. Make sure to check with the Wyoming Department of Transportation for specific requirements and restrictions.
In general, the following endorsements are available for Class B CDL drivers in Wyoming:
1. Passenger (P) endorsement: required for drivers who will be operating a vehicle designed to transport 16 or more passengers, including the driver.
2. School Bus (S) endorsement: required for drivers who will be operating a school bus.
3. Tank (N) endorsement: required for drivers who will be transporting liquids or gases in bulk containers with a capacity of 1,000 gallons or more.
4. Hazardous Materials (H) endorsement: required for drivers who will be transporting hazardous materials that require placarding.
It's important to note that additional endorsements may be required for specific types of vehicles or cargo. Make sure to check with the Wyoming Department of Transportation for specific requirements and restrictions.
The Class B CDL (Commercial Driver's License) skills test in Wyoming consists of three parts: pre-trip inspection, basic vehicle control, and on-road driving. Each part of the test is designed to assess your ability to safely operate a Class B commercial vehicle.
1. Pre-trip Inspection: You will be required to perform a thorough inspection of your vehicle, including all safety equipment, brakes, tires, lights, and other components. You must identify any defects or problems and explain how you would correct them.
2. Basic Vehicle Control: You will be asked to demonstrate your ability to control the vehicle in various situations. This includes straight-line backing, offset backing, parallel parking, and docking.
3. On-road Driving: You will be required to demonstrate your ability to safely operate the vehicle on public roads. This includes merging onto highways, changing lanes, turning at intersections, and making emergency stops.
During the test, you will be evaluated on a variety of skills including speed control, steering control, shifting gears, signaling, and communication with other drivers. It's important to practice these skills extensively before taking the skills test.
Once you pass the skills test and other required tests (such as the written knowledge test), you will be issued a Class B CDL license which will allow you to legally operate commercial vehicles that fall under this classification in Wyoming.
1. Pre-trip Inspection: You will be required to perform a thorough inspection of your vehicle, including all safety equipment, brakes, tires, lights, and other components. You must identify any defects or problems and explain how you would correct them.
2. Basic Vehicle Control: You will be asked to demonstrate your ability to control the vehicle in various situations. This includes straight-line backing, offset backing, parallel parking, and docking.
3. On-road Driving: You will be required to demonstrate your ability to safely operate the vehicle on public roads. This includes merging onto highways, changing lanes, turning at intersections, and making emergency stops.
During the test, you will be evaluated on a variety of skills including speed control, steering control, shifting gears, signaling, and communication with other drivers. It's important to practice these skills extensively before taking the skills test.
Once you pass the skills test and other required tests (such as the written knowledge test), you will be issued a Class B CDL license which will allow you to legally operate commercial vehicles that fall under this classification in Wyoming.
Yes, there are some restrictions and limitations for drivers with a Class B CDL (Commercial Driver's License) license in Wyoming. Here are some of the most important ones:
1. Vehicle Weight: Drivers with a Class B CDL license are allowed to operate single vehicles with a weight rating of 26,001 pounds or more, or a combination of vehicles with a total weight rating of less than 26,001 pounds. This means that they cannot operate vehicles that exceed this weight limit.
2. Passenger Limit: Drivers with a Class B CDL license are allowed to transport up to 16 passengers (including the driver) if they have obtained the Passenger (P) endorsement on their license.
3. Cargo Limit: Drivers with a Class B CDL license are allowed to transport any type of non-hazardous material and any quantity of hazardous materials that do not require placards if they have not obtained the Hazardous Materials (H) endorsement on their license.
4. Geographic Limitation: Some states may require additional endorsements or permits for drivers with a Class B CDL license who will be operating in their state.
It's important to note that these restrictions and limitations may vary depending on the state and specific circumstances. Make sure to check with the Wyoming Department of Transportation for specific requirements and restrictions related to your Class B CDL license.
1. Vehicle Weight: Drivers with a Class B CDL license are allowed to operate single vehicles with a weight rating of 26,001 pounds or more, or a combination of vehicles with a total weight rating of less than 26,001 pounds. This means that they cannot operate vehicles that exceed this weight limit.
2. Passenger Limit: Drivers with a Class B CDL license are allowed to transport up to 16 passengers (including the driver) if they have obtained the Passenger (P) endorsement on their license.
3. Cargo Limit: Drivers with a Class B CDL license are allowed to transport any type of non-hazardous material and any quantity of hazardous materials that do not require placards if they have not obtained the Hazardous Materials (H) endorsement on their license.
4. Geographic Limitation: Some states may require additional endorsements or permits for drivers with a Class B CDL license who will be operating in their state.
It's important to note that these restrictions and limitations may vary depending on the state and specific circumstances. Make sure to check with the Wyoming Department of Transportation for specific requirements and restrictions related to your Class B CDL license.
No, in Wyoming, the Class B CDL (Commercial Driver's License) written test is not available in languages other than English. The Wyoming Department of Transportation (WYDOT) requires all applicants to take the written test in English.
However, if you have difficulty understanding English, you may bring an interpreter with you to help translate the test questions and instructions. The interpreter must be at least 18 years old and cannot be a family member or friend. Additionally, the interpreter must sign a statement affirming that they will accurately translate the exam questions and that they will not provide any assistance beyond translation.
It's important to note that the interpreter is not allowed to assist you with answering the questions or provide any other kind of assistance beyond translation. You are solely responsible for understanding and answering the questions on your own.
However, if you have difficulty understanding English, you may bring an interpreter with you to help translate the test questions and instructions. The interpreter must be at least 18 years old and cannot be a family member or friend. Additionally, the interpreter must sign a statement affirming that they will accurately translate the exam questions and that they will not provide any assistance beyond translation.
It's important to note that the interpreter is not allowed to assist you with answering the questions or provide any other kind of assistance beyond translation. You are solely responsible for understanding and answering the questions on your own.
Yes, the Wyoming Department of Transportation (WYDOT) provides accommodations for individuals with disabilities who need assistance to take the Class B CDL (Commercial Driver's License) written test.
If you have a disability that may affect your ability to take the test, you can request accommodations such as extra time, a separate testing room, or assistive technology. You will need to submit a written request for accommodations along with documentation of your disability and the specific accommodations you are requesting.
WYDOT will review your request and may require additional information or documentation to support your request. Once your request is approved, you will be notified of the accommodations that will be provided.
It's important to note that requests for accommodations must be made in advance, as it may take time for WYDOT to review and approve your request. Additionally, accommodations may not be granted if they fundamentally alter the nature of the test or give you an unfair advantage over other test-takers.
If you have a disability that may affect your ability to take the test, you can request accommodations such as extra time, a separate testing room, or assistive technology. You will need to submit a written request for accommodations along with documentation of your disability and the specific accommodations you are requesting.
WYDOT will review your request and may require additional information or documentation to support your request. Once your request is approved, you will be notified of the accommodations that will be provided.
It's important to note that requests for accommodations must be made in advance, as it may take time for WYDOT to review and approve your request. Additionally, accommodations may not be granted if they fundamentally alter the nature of the test or give you an unfair advantage over other test-takers.
Yes, if you fail the Class B CDL (Commercial Driver's License) written test in Wyoming, you are allowed to retake it. However, there are certain rules and waiting periods that you must follow.
If you fail the written test, you will be allowed to retake it on a future date. You will need to pay the testing fee again and schedule a new appointment to take the test. You cannot retake the test on the same day.
In Wyoming, there is no limit to the number of times you can retake the written test. However, there is a waiting period of at least one day between attempts. This means that if you fail the test, you must wait at least one day before scheduling your next attempt.
It's important to note that there may be additional waiting periods or requirements if you fail the written test multiple times. For example, if you fail the test three times, you may be required to complete additional training or take a refresher course before being allowed to retake the test again.
If you fail the written test, you will be allowed to retake it on a future date. You will need to pay the testing fee again and schedule a new appointment to take the test. You cannot retake the test on the same day.
In Wyoming, there is no limit to the number of times you can retake the written test. However, there is a waiting period of at least one day between attempts. This means that if you fail the test, you must wait at least one day before scheduling your next attempt.
It's important to note that there may be additional waiting periods or requirements if you fail the written test multiple times. For example, if you fail the test three times, you may be required to complete additional training or take a refresher course before being allowed to retake the test again.
